We had to install a pin switch for the trunk but we didn’t want anything visible to detract away from the clean look we are going after. We took a small “micro” switch and built a ABS mounting plate for it so that when the trunk hinge is closed all the way it makes contact, if the trunk opens as little as 1/8″ it will trigger the alarm.

http://www.hzemall.com/wordpress/wp-...04321small.jpg

http://www.hzemall.com/wordpress/wp-...10436small.jpg

http://www.hzemall.com/wordpress/wp-...10438small.jpg

We also started to layup the fiberglass for the subwoofer enclosure/console for between the rear bucket seats.

http://www.hzemall.com/wordpress/wp-...10420small.jpg

http://www.hzemall.com/wordpress/wp-...10430small.jpg

Really Nice Work, Keep me informed. I wonder how hard it it to get a car across the border:unibrow:

Easy to sell, easier to have it worked on :)

1969 camaro console
 

What type of glue did you use on the modified GTO console? Sweet job!!

Console looks good,I have an idea of what it takes to make look good,lot of work!:thumbsup:

Flock
 

Tim,

What kind of material will you use to 'flock' the inside of the console or the rear door panels?

Darren

Flocking is where you apply a glue to a surface, then "dust" fibers over it till they all stick.

It's the same thing that most older glove boxes were lined with.

Thank you, that means alot coming from you.

We got the Modo Innovations Electric Trunk Release kit installed (see our review of this product)

http://www.hzemall.com/wordpress/wp-...10472small.jpg

http://www.hzemall.com/wordpress/wp-...10485small.jpg

Got the stereo rack wired and mounted. As we always do, we used molex plugs on the power wires for easy servicing.

http://www.hzemall.com/wordpress/wp-...10461small.jpg

http://www.hzemall.com/wordpress/wp-...10470small.jpg

where do we see the review? Do you have a different web sight other then you Blog?