Lateral-g Forums
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Working on the wiring (https://www.lateral-g.net/forums/showthread.php?t=13763)

XcYZ 03-03-2008 05:12 PM
Quote:
Originally Posted by kwhizz
Somebody is having "Way" too much Fun.........Look'in good Scott.....96 days till dinner at Rendevous...........Me thinks....you will be finished with a lot of time to spare..........Great Job!!

Ken

Thanks Ken! The thrash is on, gotta race you to Memphis. :cheers:




Quote:
Originally Posted by Nate Hanson
Scott,

When can I drop my S10 off for wiring?? haha I wish I was that far along with mine!:D Gotta get it done for the Power Tour though, I'll be in Rochester!
Nah, the wiring isn't really that bad, it just looks nasty in that pic because I haven't started dressing the harness yet.

Can't wait for Power Tour. :thumbsup:

slenning 03-03-2008 07:49 PM
Quote:
Originally Posted by XcYZ
No problem, Tony. Once you start on the wiring, I think you'll be extremely happy with the AAW Classic Update kit. Just work with it in sub-systems, like the front harness, rear harness, dash, etc, and it will be a breeze. The kit includes a couple of nice schematics and every connector that you need. If you have any questions just shoot me an e-mail. :cheers:
Hi Scott I also used the AAW kit. Very nice kit! Like you said, taking it a section at a time makes it a fairly simple task. The 69 is looking fantastic, can't wait to see it done!! Maybe we can meet halfway and make a dual LS7 burnout video??:unibrow:

NEVER ENOUGH 03-04-2008 09:22 AM
Quote:
Originally Posted by XcYZ
Nah, the wiring isn't really that bad, it just looks nasty in that pic because I haven't started dressing the harness yet.
Looks great Scott. :thumbsup:
How about an after picture if you get a chance?

XcYZ 03-04-2008 10:13 AM
Quote:
Originally Posted by NEVER ENOUGH
Looks great Scott. :thumbsup:
How about an after picture if you get a chance?
Sure, I can do that. Been busy finishing up the power window installation and wiring and making a bracket that flush mounts the power window switches under the dash. I removed the glovebox and made a sheetmetal insert to mount the MODO electric trunk release button, NX window switch, NX throttle position sensor module for sensing WOT on the throttle by wire, and a place to mount the fuse block for the ECM, fuel pump, etc. I'll probably mount the OBDII connector inside there as well. Who needs a glove box anyways. :D


All times are GMT -7. The time now is 04:10 PM.
Page 4 of 4 « First 23 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net