YouTube video
 

:D
Video link

that epitomizes pro touring
tastefully done Good Luck..Id happily pay 68K for muscle like that

I would jump on it but it is just the wrong time.
too bad.

Great car!!!!

Sorry for the late reply. I think corvette mike does consignment stuff. His shop is located in Placentia.

http://www.corvettemike.com/

ttt

;)

Hello, yes my car is still for sale, tell your friends, etc!

:cheers:
Thanks

Please note that I will be including the RamJet Diacom software and cable from Rinda. This will let you plug your laptop into the engine and gather all kinds of data, from RPM and spark curve to temperature, fuel, and O2 sensor data. Want to know how many hours the engine has been at 2000RPM? 3000RPM? This software will tell you! Very useful!

Flash is right about Barrett Jackson. Here are some details.

In the upcoming BJ auction in Las Vegas there are 22 Camaros for sale. Break down is 5ea. 1967's, 4ea. 1968, 10ea. 1969, 1ea. 1970, 1ea. 1971 and 1ea. 1979. They have mostly highly restored stock cars, but several resto-mods, pro touring and pro street cars available.

For historical pricing the last show in Palm Beach the break out for Gen I Camaros was as follows.

9ea. 1967 cars ranging from $25-90K bulk in the 35K range
10ea 1968 $34-68K
10ea 1969 $39-64K

I believe BJ charges the seller a 9% commmission also which really hits the take home $.

I decided to remove the Cal-Tracs and see if that loosened up the rear.