Looking good John!!!


And good choice on not blowing the car up..... Smart. So many people get so far ahead of themselves and end up with boxes of junk years later.

Great start to the build. I like your choice of components,too.

Front end is back together, and just put it on the ground. Still dirty, but had to get some shots.

Anyone need some old stuff? :D

After building a truck and a couple fox body mustangs. I'm back on the Nova again.

In between other projects I sold the old 4.3l V6 / 4L60 combo, and started working on the engine compartment.

Digging into the fenders to get the old heater unit out.

Mocking up a Detroit Speed cover plate and started working on the subframe and firewall.

After a fair debate, I decided to use Holley/Hooker swap system for the LS2 install. Starting with the engine frame mounts.

LS2 mock up begins..

More LS2 mock up. Also using the Holley high mount accessory drive, and of course.. a Rick's Tank's RestoMod tank with a ZL1 pump :) Carl C's VaporWorx controller and harness will drive the pump.

That brings the post up to date, hopefully more updates will follow, in closer intervals :D