Lateral-g Forums - So, who's going to run an LSx engine package in their 67-69 F-body ??

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- LSX Conversions (https://www.lateral-g.net/forums/forumdisplay.php?f=70)

- - So, who's going to run an LSx engine package in their 67-69 F-body ?? (https://www.lateral-g.net/forums/showthread.php?t=1871)

LS1 in a 68 Firebird

We are about to do an LS1 in my neighbors 68 F-body. What issues will we have with install? Will the A/C compressor in the stock location clear the right frame rail? Any and all thoughts will be much appreciated.

-Dave

Quote:

Originally Posted by DaCajun

Engine mounts, transmission cross member, clutch hydraulics and the oil pan..... just for starters. The AC compressor will not fit unless you use engine mounts that shove the engine foward.... but that isnt the way to go about it either. There are a few different way to go about the AC compressor but there are some good ones and definately some bad ones........

There are a couple of ways to go about this but just about all the parts you are needing are available through ATS.

What is the cost involved with this swap.

minus the engine/tranny:

A) what are the ancillary parts costs

B) can't think of a B right now

Quote:

Originally Posted by Rob07002

What is the cost involved with this swap.

minus the engine/tranny:

A) what are the ancillary parts costs

B) can't think of a B right now

harness work 300-500
pcm reprogram 100-300
or tuner software to program pcm yourself 500-1000
motor mounts 100-200
trany xmember 100-200
fuel tank efi replacement or conversion 500-1000
oil pan 200-500
new or shortened drive shaft 300-500

other possible needs:
o2 sensors &/or wideband for tuning
fuel regulator
fuel line
belt(s)
pullys/brackets
air filter
speedo d/a converter
raidator/fan

Quote:

Originally Posted by chicane

No, actually its simple if you have the right stuff. This just happends to be our specialty.......

Things you'll need:

Engine
Conversion engine mounts
Conversion oil pan
Headers and exhaust
Transmission
Transmission install kit to include a cross member, modified hydraulic slave and bracketry
Driveshaft - Either shorten what you have or have a custom one built to your specs
Computer/electronics - There are quite a few companies making drop in wiring harnesses into non EFI chassis nowadays
Fuel system and tank for EFI system

I know I have probably left some things off of the list, but this is these are the main necessities for a swap..... depending on your chassis being a manual or automatic transmission chassis.

If you have a chance to go to SEMA, stop by.... we'll have everything on display. If not, our catalog will be here shortly with a comprehensive laydown on everything about this subject.

I just wish I could leak you guys some pictures....... :_paranoid

Chicane:

What business do you have and how does someone get a catalog?
Anything LS2 oriented, I am interested in.

Looking forward to hearing from you.

tyoneal

Quote:

Originally Posted by tyoneal

Chicane:

What business do you have and how does someone get a catalog?
Anything LS2 oriented, I am interested in.

Looking forward to hearing from you.

tyoneal

I believe he works with ATS, and they have very cool products.

http://www.t56kit.com/

Jody

Jody,

Did I see the Mal on a trailer headed South on I-5 today?

Quote:

Originally Posted by Damn True

Jody,

Did I see the Mal on a trailer headed South on I-5 today?

I don't think so! :eek:

Jody

Yes a LS7 in my 69 vert, just waiting on small parts to hear it run and hopefully drive it before snow. :yes:

Quote:

Originally Posted by mstennes

Yes a LS7 in my 69 vert, just waiting on small parts to hear it run and hopefully drive it before snow. :yes:

:ttiwop:

Of course we want pics!!!!

Lead.