Questions on tt engine
 

No The accesories,sheetmetal intake and polish are extra.But i can offer you the same deal as bruce for 1400 extra i'll throw in the intake acc are another 1300 its a f-body drive setup and the polish would be around 800 if you wanted to go that route so 23500.00 would get you it just like you see it but its a all aluminum block and heads the shot is with a iron block.Delivery time is 2.5 months from time of order.I would be glad to walk you threw any part of it.The map i do on the dyno is wide open then from there we have a mapping feature on the dyno were we run 10%tps up to 6300 rpm adjust all the afrs then 20 % adjust afrs then 30/40/50 and so on so the base map will be very nice.But there are so cold start and light load accerations you simply can't get on a dyno that has to be done in the car.If the cars an auto it probally won't need any tweeking.Stick cars with light flywheels may take some adjusting.There would be mutiple ways to accomplish this.The software is very easy its Electromotive newest version a total remake from the previous 3.56 So i can walk you threw that on the phone when your ready,Or if you don't want to deal with it you could always ship the car when ready and i'll do that for you here.Shipping is very affordable these days averaging around 1k one way from pretty much anywhere.But it's pretty simple.The changes can be made on fly and the ve table is highlighted in what cell your running so you can drive the car and instantly see whats happening.Thats the beauty of this package is it has a nice stand alone unit that comes with it.If you have any other questions i would be glad to answer them thanks Tom.

im about this........ |________| close to calling you and and my bank.

Thanks. I'll call you later.

So is the engine pictured at the beginning of this ad 19,995.00 or 23,500.00 ?

$23500. Stop doodling in your notebook, put down that car magazine, and pay attention to the teacher or you'll be sent to detention.

19,995 +1,400 + 1,300 + 800 = picture. Carry the two.

Sorry actually 23,495

... and the one in the first picture has a steel block, the one you get has an aluminum.....

... make sure you ask for a T-Shirt with your engine. Tom is tight with those shirts, but he'll give it up for a motor...:willy:

I am interested !

Thank You Guys
 

Well This was the first time i ever offered a group purchase on engines and i think it worked out great I'm happy to say that i sold the three engines needed and will be able to provide the engines for 19995.00.The coolest thing about this was this was posted on many other boards but all three sales came from lateral-g members.And all three customers took the savings of 6000 dollars per engine and upgraded into bomb proof bottom ends all three guys got the Lsx iron gm block upgrade,Oliver billet rods,Callies crankshaft.And are going into my new billet crossram Ir intake manifold for the ls And they are still under the original price price of 26000.00.I'm going to do a full build pics threw the entire process including dynoing and video for everyone so you guys can see what goes into it.Just wanted to say thanks and i'll keep you updated as we go there still is probally another week for any of you who might have been interested to get in on this run and get the savings Talk to you soon Tom