Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   '73 Celica --->89 supra (https://www.lateral-g.net/forums/showthread.php?t=2395)

Travis Rankin 12-01-2005 07:27 PM

Little more progress..

got the rear bumper positioned and mounted
http://www.trdv.ca/offroad/assorted/celica/bumper.jpg

The steering all done, the crossmember notched for oil pan clearance, and the firewall cut and trimmed to be set way back, left side notched out for the side drafts..

http://www.trdv.ca/offroad/assorted/.../steering3.jpg

http://www.trdv.ca/offroad/assorted/.../steering2.jpg

http://www.trdv.ca/offroad/assorted/celica/steering.jpg

Travis Rankin 12-02-2005 12:53 AM

gettin trigger happy :D

http://www.trdv.ca/offroad/assorted/celica/engine3.jpg
http://www.trdv.ca/offroad/assorted/celica/engine4.jpg

Travis Rankin 12-02-2005 07:51 PM

Needed more room behind the motor...

http://www.trdv.ca/offroad/assorted/celica/firewall.jpg
http://www.trdv.ca/offroad/assorted/.../firewall2.jpg
http://www.trdv.ca/offroad/assorted/.../firewall3.jpg

Travis Rankin 12-02-2005 10:07 PM

http://www.trdv.ca/offroad/assorted/.../firewall4.jpg

Travis Rankin 12-12-2005 07:14 PM

http://www.trdv.ca/offroad/assorted/celica/frontend.jpg

markss28 12-13-2005 06:51 AM

Looks like alot of fun. I hope you finish soon so we can all see your vision in this thing.

Travis Rankin 12-15-2005 03:07 PM

I wanna know what'll look like too :D

Got the tranny in, and the Transmount/exhaust hole mocked in..

http://www.trdv.ca/offroad/assorted/celica/trans.jpg
http://www.trdv.ca/offroad/assorted/celica/engine5.jpg

And started the header...

Here I cut the original manifold down to use as a template on my pantagraph, to make an official template.
I cut out the holes in the thin guage material, then shaped the outside and the ports to be used in the pantagraph....

http://www.trdv.ca/offroad/assorted/celica/header.jpg

Then put the template in and cut out the header plate..

http://www.trdv.ca/offroad/assorted/celica/header2.jpg

Travis Rankin 12-15-2005 08:31 PM

http://www.trdv.ca/offroad/assorted/celica/header3.jpg
http://www.trdv.ca/offroad/assorted/celica/header4.jpg
http://www.trdv.ca/offroad/assorted/celica/header5.jpg

Travis Rankin 12-17-2005 02:37 PM

Build notes:

Engine relocation= To Rear 6 1/2"

Total time to date= 37 days

Actual build time= Approx. 100 hrs

Total cost to date (minus labour)= $1500.00 +/- $50

Actual joy and excitement= PRICELESS!!! :D

Travis Rankin 12-17-2005 10:12 PM

Header Flanges
http://www.trdv.ca/offroad/assorted/celica/header7.jpg
And the finished header with the finished muffler i made for it.

http://www.trdv.ca/offroad/assorted/...er+muffler.jpg


All times are GMT -7. The time now is 06:13 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net