I finished block sanding the deck lid trying to get it to match the quarters than epoxy primed


http://img.photobucket.com/albums/v3...0Coupe/232.jpg

Sprayed SPI Turbo primer

http://img.photobucket.com/albums/v3...0Coupe/233.jpg

I spend most of the day working on something that you don't see 95% of the time the back of the deck lid.

I finished sanding and than epoxy primed

http://img.photobucket.com/albums/v3...0Coupe/234.jpg

http://img.photobucket.com/albums/v3...0Coupe/235.jpg

Today I sanded the deck lid than sprayed a coat of SPI white epoxy

http://img.photobucket.com/albums/v3...0Coupe/238.jpg

http://img.photobucket.com/albums/v3...0Coupe/240.jpg

I waited a couple of hours than sprayed 3 coats of SPI single stage red.

http://img.photobucket.com/albums/v3...0Coupe/242.jpg

http://img.photobucket.com/albums/v3...0Coupe/243.jpg

I was not happy with the hood after block sanding. I added a little filler than epoxy primed again.

http://img.photobucket.com/albums/v3...0Coupe/244.jpg

http://img.photobucket.com/albums/v3...0Coupe/245.jpg

I block sanded the hood again and epoxy primed white next I need to sand and paint the back side of the hood.

http://img.photobucket.com/albums/v3...0Coupe/246.jpg

It has been awhile since I got to work on the 68 so today I decided to add a little filler to each quarter to tighten the gap on the fiberglass deck lid and I block sanded the roof and taillight panel.

http://img.photobucket.com/albums/v3...0Coupe/250.jpg

http://img.photobucket.com/albums/v3...0Coupe/251.jpg

http://img.photobucket.com/albums/v3...0Coupe/252.jpg

We had a problem with the drivers door sticking out 1/4" at the bottom even after elongating the holes in the hinge. We cut 1/4" out of the bottom of the door.

http://img.photobucket.com/albums/v3...0Coupe/253.jpg

http://img.photobucket.com/albums/v3...0Coupe/254.jpg

Brian had to cut out a section to get at the inner brace to cut it. After the brace was welded he brushed some epoxy primer than welded back in the piece he cut out.

http://img.photobucket.com/albums/v3...0Coupe/255.jpg

http://img.photobucket.com/albums/v3...0Coupe/256.jpg

I sprayed SPI Red yesterday on the hood and deck lid and the clear today. I will wet sand and than spray 3 more coats of SPI Universal clear.

http://img.photobucket.com/albums/v3...0Coupe/258.jpg

http://img.photobucket.com/albums/v3...0Coupe/257.jpg

Ready for 2 coats of epoxy primer

http://img.photobucket.com/albums/v3...0Coupe/259.jpg

http://img.photobucket.com/albums/v3...0Coupe/261.jpg

http://img.photobucket.com/albums/v3...0Coupe/263.jpg

http://img.photobucket.com/albums/v3...0Coupe/264.jpg

http://img.photobucket.com/albums/v3...0Coupe/265.jpg