lol yes my camara sucks. its about 8 years old, has been in the garage most of the time and has hit the ground many times and was also free. but i rather spend money on go fast parts than a new one :thumbsup:

haven't had a good update in sometime. i had some house work to do so i didn't get to spend as much time on the car as i wanted to. all of the rear sheet metal is all welded together and the frame rails are in and done. only got to work on the car a few hours saturday but got a solid day in today.



got the driver and passenger sub frame connectors installed

http://sphotos.ak.fbcdn.net/hphotos-..._1601342_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-...9_346099_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._2105363_n.jpg



i didn't have any 1/8" plate to make the close out panels so i went ahead and got the passenger tub mocked up and the driver side floor and frame cut out.



http://sphotos.ak.fbcdn.net/hphotos-..._6692183_n.jpg

http://hphotos-snc3.fbcdn.net/hs318...._6947649_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._5885084_n.jpg



going to try and get some plate tomorrow but i'm not sure if i'll get to work on the car or not for a few days. some more yard work to do and the house comes first.

Shouldn't a project named "Battle Wagon" be a wagon? :_paranoid

Nice work so far. Keep it up! :thumbsup:

haven't had alot of time to work on the car since i have been doing alot of house work since its been so nice out. i've only got to work on the car one or two nights a week for a few hours after work. anyways lots of stuff done.

http://sphotos.ak.fbcdn.net/hphotos-..._8045713_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._3183574_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._3035924_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._1051640_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._4508444_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._2079881_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-...5_504579_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._7737511_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._5035628_n.jpg

I dont know how I missed this, you sure do some beautiful work!

new go fast parts thanks to frank at prodigy customs.

http://sphotos.ak.fbcdn.net/hphotos-..._5429910_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7401548_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._7763388_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._2638013_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._3435478_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._8365204_n.jpg



also have a new firewall to move my engine back about 4" to get the LS1 to fit the speedtech sub frame. again more thanks to frank for answering some questions about a few things.

http://sphotos.ak.fbcdn.net/hphotos-..._8251185_n.jpg



and installed the 41 year old seat pans to save a few bucks.

http://sphotos.ak.fbcdn.net/hphotos-..._7374751_n.jpg

o noooo the wheel barrow!:_paranoid

i didn't really want to do it but speed tech said the floor needs cut to make the LS and T56 fit. they also said the engine needs to move to the passenger side to clear the power steeing rack. i put the engine in and if i center it and move it back i can clear the rack, use the stock a/c compressor and the stock f-body oil pan. so thats a few grand in cash i don't have to spend now :thumbsup:

got the tires today so i mounted and road force balanced them (all less than 7 lbs road force if you know what that means) BFG G-Force KDW 295/35ZR18 front 335/30ZR18 rear.

http://sphotos.ak.fbcdn.net/hphotos-..._7259433_n.jpg





car at ride hight

http://sphotos.ak.fbcdn.net/hphotos-..._2533140_n.jpg



only had a few hours tonight to play but to make the wheel barrow fit the engine it needed cut in half and 5" added

http://sphotos.ak.fbcdn.net/hphotos-..._4767855_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-..._4494534_n.jpg

Aj .... Looking good!!! Are you going to replace the lower inner quarter panel ? They now make lower replacements...