Very nice!! Love the stance and the fat 15's in back! :thumbsup:

Ok, that´s not far from here.

My bad! But...

We end up about the same depth anyway, cause here in Sweden we´re not so big around the waist... :unibrow:

Will check later if I have any pics. Should have at least of the front brackets. I cut those almost in half, leaving just the front of it and welded that to the tubing (new frame rails). Rear brackets, coil over cross member, I made almost completely from scratch. Don´t have any pictures of that but will take some next time the car is on jacks.

Thanks!

Those wheels and tires are borrowed, but the size is gonna be about the same. 15x12" in the back and 15x8" in the front. 10" wide in front would have been nice, but that would only be possible with 18" wheels though.

Thank you!

Finished the garage exterior this summer. Fall and winter is coming so there´ll be lots of time spent inside these walls...

http://www.68supersport.com/Other/Pictures/Garaget.jpg

Got some Weber carbs for the Camaro today.

http://www.68supersport.com/images/s...101edit900.jpg

http://www.68supersport.com/images/s...102edit900.jpg

Nothing sounds sweeter than DCOE Webers! I ran a pair of 40's on a 2TC Toyota that I drove daily and Auto-X'd for three years back in the early 80's.

Can't wait to hear your motor!

Your photography is better than the car. :unibrow: The car rocks..:thumbsup:

I can imagine! I had four Dellorto DRLA´s on my previous Camaro - the sound and torque is very nice :)

Haha, many thanks! :bow:

Started making some panels for the interior. Will post more pictures when they are completely done.

Also started converting my website to english since statistics show many visitors are americans and even more speaks english...


http://www.68supersport.com/images/s...216edit900.jpg

http://www.68supersport.com/images/s...218edit900.jpg

http://www.68supersport.com/images/s...238edit900.jpg

http://www.68supersport.com/images/s...247edit900.jpg

Really cool build
 

Love what you'be been doing with the Camaro, and really like the fact that you've stuck with Rally wheels as they really look cool on there. Did you have the rears widened? Also like your work on the front lighting conversion as well as your choice in the Webers. Very very nice.

By the way, it`s nice seeing how clean you keep that shop floor when you`re taking pictures. :unibrow:

Graeme

Thanks! Those wheels are borrowed but the ones I ordered are the same size. Took steel wheels now. They'll do through the build and they give me a chance to correct backspacing if necessary when ordering magnesium wheels in the future... =)

I always clean the floor at the end of the day. That's also a good time to take some photos ;)

Thanks again!

You must be a surgeon by trade. I don't think I've ever seen a more sanitary work space. Exceptional work with the camera and fab. :thumbsup: