Lateral-g Forums - Lokar 69 Camaro by Goolsby Customs

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Lokar 69 Camaro by Goolsby Customs (https://www.lateral-g.net/forums/showthread.php?t=34740)

Good looking work cant wait to see more.

Mike

Pegasus looked good at the show and I liked the c10 too, any build pics of it?

Stephen, we are doing a photoshoot with the 64 truck in a week or so and will get you some pictures then, as far as the build pics they are up on our website , didnt post them up here because I didnt think they were "Lat G" enough

here is a few more of the camaro showing the raised trans. tunnel,cut out firewall, as well as the frame pockets we did in the floors. The "leg" coming down on the side is where we will extend the rocker to and remove the pinch weld underneath for a cleaner look, thanks everyone and enjoy.

http://i767.photobucket.com/albums/x...Image00170.jpg

http://i767.photobucket.com/albums/x...Image00171.jpg

http://i767.photobucket.com/albums/x...Image00172.jpg

Looking good guys!

Anything you guys build is lat g worthy! You guys do some killer work! :thumbsup:

[QUOTE=fbm37;400898]Stephen, we are doing a photoshoot with the 64 truck in a week or so and will get you some pictures then, as far as the build pics they are up on our website , didnt post them up here because I didnt think they were "Lat G" enough

[QUOTE=56pickup;400990]Looking good guys!

Anything you guys build is lat g worthy! You guys do some killer work! :thumbsup:

Quote:

Originally Posted by fbm37 (Post 400898)

Well thanks Tyler we appreciate it ,your coming along nicely on the ford I see

Thanks everybody,

Here are a few that show a small inlay panelwe did on the tail panel , nothing crazy just a clean little panel ,as well as a few that we took while the car came down off the stands for a bit

http://i767.photobucket.com/albums/x...age00160-1.jpg

Stock rear panel with Marquez lights , looks good but needed a little something extra

http://i767.photobucket.com/albums/x...age00161-1.jpg

cut out the area in between the tailights

http://i767.photobucket.com/albums/x...Image00212.jpg

then re created the character line that goes around the lights and welded it in

http://i767.photobucket.com/albums/x...Image00214.jpg

http://i767.photobucket.com/albums/x...Image00213.jpg

http://i767.photobucket.com/albums/x...Image00196.jpg

http://i767.photobucket.com/albums/x...Image00195.jpg

welded in back panel to create the "box" for the new trim piece to reside

http://i767.photobucket.com/albums/x...Image00208.jpg

http://i767.photobucket.com/albums/x...Image00203.jpg

New trim piece made with a small reveal line in it, the plan is to have this piece plated with the tailights

http://i767.photobucket.com/albums/x...Image00220.jpg

http://i767.photobucket.com/albums/x...Image00218.jpg