Lateral-g Forums - 1967 Chevelle Pro-Touring Tribute Car. Lots of pics!!

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - 1967 Chevelle Pro-Touring Tribute Car. Lots of pics!! (https://www.lateral-g.net/forums/showthread.php?t=34813)

Just got back with a little something from SPD Exhaust. This is the 304 stainless that will make up the one-off headers which are being fabricated in house by Dominator Street Rods.
http://i1126.photobucket.com/albums/...HEADERS001.jpg

http://i1126.photobucket.com/albums/...HEADERS002.jpg

http://i1126.photobucket.com/albums/...HEADERS003.jpg

http://i1126.photobucket.com/albums/...HEADERS004.jpg

http://i1126.photobucket.com/albums/...HEADERS005.jpg

I love the project, nice work.

We've made a little more progress on the chassis construction.

The rear crossmember is fabbed up and ready to weld in.
http://i1126.photobucket.com/albums/...UPDATES001.jpg

http://i1126.photobucket.com/albums/...UPDATES002.jpg

http://i1126.photobucket.com/albums/...UPDATES003.jpg

The front upper and lower control arms are just about finished.
http://i1126.photobucket.com/albums/...UPDATES004.jpg

These are the ATS spindles and thd SFK ZR-1 hubs.
http://i1126.photobucket.com/albums/...UPDATES007.jpg

This is the start of the removeable transmission crossmember. It will pretty much match the rear crossmember with the exhaust pass through.
http://i1126.photobucket.com/albums/...UPDATES005.jpg

http://i1126.photobucket.com/albums/...UPDATES006.jpg

good stuff greg...any more shots of your drip rails....mine are rusted through and i'll be doing this soon.

Hello Greg.
I just wanted to tell you I think this is a great build. No matter what direction you take on any part of this build...in the end one little detail over another doesnt matter. Its the INTENT that counts. I myself have considered a tribute build. I was working in Tampa in 2010 installing equipment into Tampa Police cruisers when I heard about the two officers that were killed during a traffic stop and the ensuing manhunt. Jeff Kocab was one of the officers.

I hope you dont mind but I gave your Tribute some exposure and sent a link to the build thread to 93.3 FLZ in Tampa for the MJ Morning show on Facebook. I dont know what if any help you may need or if you are aware of other tribute builds but I felt that this should be shared.
MJ is a big fan of the Blues Brothers and of Law Enforcement everywhere. His real name is Todd Shnitt.

I have been a lurker here for some time as I have limited funds and most upgrades to my pseudo P/T wanna be is my 1987 caprice daily driver. I love the builds going on here and have considered for sometime abut doing one of these Box chevys for a Law enforcement tribute build.

GREAT WORK so far... and keep it up.:thumbsup: Any plans for showing the car at Local or state L/E functions? DARE? :D
Todd

Quote:

Originally Posted by MotorCityImpala (Post 395525)

Thanks for the encouragement and the support. I am greatful for any help I can get and love any exposure so thank you much for forwarding the build thread. Once completed, the car will actually travel all over. Of course I will be autocrossing and road racing the car whenever I can. It will be available to Law Enforcement Agency's as well as schools, festivals car shows, etc. In May of every year it will be driven to Washington D.C to attend the National Law Enforcement Memorial. Along the way, we will visit L/E agencies which have had officer's killed in the line of duty.

The car will also be used as a tool to bridge the gap between Law Enforcement Officers and at risk youth who grow up with a strong dislike of police officers. Should be a good time.

I can still use all the help I can to complete the build and raise money for my non-profit. If anyone out there can help, they can make a tax deductable donation on my web site www.inmemoryofthefallen.org

Looking good Greg. Can't wait to see more.:thumbsup: :thumbsup:

Quote:

Originally Posted by 509Chevelle (Post 398873)

Looking good Greg. Can't wait to see more.:thumbsup: :thumbsup:

Hopefully we will have the front suspension completed by the end of next week. Then we can start working on the IRS and get some wheels ordered.