Lateral-g Forums
Page 4 of 13 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Unreal 1967 Mustang (https://www.lateral-g.net/forums/showthread.php?t=37578)

Chassisworks 12-06-2012 04:58 PM
I've been watching this build with interest. I heard some cool stuff around the water cooler here at the office. Keep the pics comin'!

~Carl

Royalworks 12-06-2012 06:20 PM
I like that.

Quote:
Originally Posted by GPR (Post 450318)
This is what Brian has been fabricating. It is an under the dash hood release. The hood required a lot of fabrication along with this latch that came off of another Ford. To find out all the details you will have to read the build story in an upcoming issue of Modified Mustangs & Fords magazine.

http://img.photobucket.com/albums/v3...k/DSCN3664.jpg

coolwelder62 12-06-2012 09:15 PM
Awesome build thread.You are doing a great job working thought the problems of the fine chinaman workman ship.

GPR 12-07-2012 11:09 AM
Quote:
Originally Posted by Chassisworks (Post 450336)
I've been watching this build with interest. I heard some cool stuff around the water cooler here at the office. Keep the pics comin'!

~Carl
I would like to know what cool stuff you heard!!

GPR 12-07-2012 11:09 AM
We removed all the suspension now it goes on a cart to prime and finish all the the bodywork

http://img.photobucket.com/albums/v3...k/DSCN3675.jpg

GPR 01-07-2013 02:32 PM
Read all about the under dash hood release install in an upcoming issue of Modified Mustangs & Fords magazine.

http://img.photobucket.com/albums/v3...k/DSCN3873.jpg

http://img.photobucket.com/albums/v3...k/DSCN3878.jpg

http://img.photobucket.com/albums/v3...k/DSCN3876.jpg

GPR 01-13-2013 01:31 PM
We have been working on getting the fenders, headlight buckets and doors to line up

http://img.photobucket.com/albums/v3...k/DSCN3745.jpg

The body was sanded down to bare metal and the next step is spray 2 coats of SPI black epoxy

http://img.photobucket.com/albums/v3...k/DSCN3966.jpg

GPR 01-19-2013 08:38 AM
The rear valance had a tack weld and also bolts.

http://img.photobucket.com/albums/v3...k/DSCN4026.jpg

Instead of studs on the valance Dynacorn used 2 different size bolts and washers from inside the trunk and attached to clips on the valance

http://img.photobucket.com/albums/v3...k/DSCN4029.jpg

We wanted to take off the rear valance to see what was behind it and just as I thought bare metal and surface rust

http://img.photobucket.com/albums/v3...k/DSCN4031.jpg

http://img.photobucket.com/albums/v3...k/DSCN4032.jpg

Tomswheels 01-19-2013 03:40 PM
Looking great...

GPR 01-20-2013 10:21 AM
We now have a new helper in the shop and he was busy sanding down to bare metal

http://img.photobucket.com/albums/v3...k/DSCN4036.jpg

http://img.photobucket.com/albums/v3...k/DSCN4037.jpg

http://img.photobucket.com/albums/v3...k/DSCN4039.jpg

http://img.photobucket.com/albums/v3...k/DSCN4040.jpg

I sprayed two coats of SPI black epoxy yesterday

http://img.photobucket.com/albums/v3...k/DSCN4041.jpg

http://img.photobucket.com/albums/v3...k/DSCN4042.jpg

http://img.photobucket.com/albums/v3...k/DSCN4043.jpg

http://img.photobucket.com/albums/v3...k/DSCN4045.jpg

http://img.photobucket.com/albums/v3...k/DSCN4046.jpg

http://img.photobucket.com/albums/v3...k/DSCN4047.jpg


All times are GMT -5. The time now is 03:21 PM.
Page 4 of 13 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net