Lateral-g Forums - Ideas for Horsepower Mods

Page 4 of 4

« First

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Ideas for Horsepower Mods (https://www.lateral-g.net/forums/showthread.php?t=37676)

Bucketlist2012

07-23-2012 09:03 AM

Quote:

Originally Posted by hotrod69camaro (Post 426155)

I put together a 383 hydraulic roller pump gas sbc for my 69 and it was between 10 and 11k. Made 541 HP on the dyno. And thats starting with everything new.

Thanks. Good to hear it..:cheers:

glassman

07-23-2012 08:24 PM

Mike, Smeding also has the 450 horsey 383 for $6895, comes with a carb, distributor and dyno sheet.

My next door neighboor and good friend just bought one for his factory five mark IV (Ford 427 with a Dart block).

I met Ben Smeding a couple of months ago, good guy, rides KTM too...lol

Flash68

07-23-2012 08:34 PM

Rob Chandler just had one of these motors built for him. Made 682 hp on pump gas with hyd roller. :D

http://www.j-performance.com/index.p...ask=view&id=37

Vegas69

07-23-2012 09:18 PM

Whatever you build, make sure it's tailored to your specific ideals. If you do plan to really road race, put a road race pan on it. If you don't want to work on it all the time, don't build a rowdy combo. If you don't think adjusting valves on a Friday night is your idea of a good time, go hydraulic. You get the point.

I'd go LS before I sunk a penny in a small block.

All times are GMT -7. The time now is 10:57 PM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page