Lateral-g Forums
Page 4 of 26 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project Double Tap... (https://www.lateral-g.net/forums/showthread.php?t=39422)

XLexusTech 04-03-2013 06:01 PM
2 Attachment(s)
Roll Cage is done, Car is ready to come home..

fleet 04-03-2013 06:04 PM
Quote:
Originally Posted by XLexusTech (Post 473695)
Roll Cage is done, Car is ready to come home..
Nice bones. :thumbsup:

Flash68 04-05-2013 12:44 AM
Quote:
Originally Posted by XLexusTech (Post 471947)
Jakes got a few more little things to button up but were closing in on done.
I love these Pics.. the idea of the underside being finished and it being a roller is really amazing.. 6 months ago it was pretty much a stalled project with a gaping hole where the trunk used to be, with no suspension and a twisted up old subframe sitting behind my garage... Now its a power plant and wiring short of a North East beast,, Anyone up for a little North / south friendly competition...? Maybe the RU faster boys vs the Yankees?
Now those underside pics are tasty.

XLexusTech 04-06-2013 09:23 AM
She back home
 
1 Attachment(s)
Back in the garage...

XLexusTech 04-07-2013 04:07 PM
2 Attachment(s)
Rust repair, plated form the rear then filled with the welder form the front.
Any advice on how to fill the divits... appreciated.

XLexusTech 04-14-2013 11:44 AM
Dash
 
5 Attachment(s)
Fond the final rust spot (everything else is already replaced or clean)
Under the dash, ground out the rust, welded up the seams and holes and locked it down with SEM, self etching primer.

XLexusTech 04-24-2013 04:48 PM
Little Filewall waork today
 
3 Attachment(s)
Decided to take my own path mounting the DSE heater delete plate.. For my 2 cents... drill out the spot welds across the top.. then cut te rest completly out.. leave enough on the bottom to overlap. weld the seam form the inside if possible..

XLexusTech 05-12-2013 02:53 PM
Advice on dash to roll bar
 
3 Attachment(s)
Some updates... Fitted the VA, unit.. IdidIt steering column, DSE Clutch master bracket welded in ... and Upper dash rough in...... What do you guys thing.. weld the dash panel to the a Pillar bar ? Pros Cons...?

XLexusTech 05-24-2013 06:40 PM
Been on a buying spree lately.
Picked up my Harness and petal from PCI looks awesome. trying to figure out where to mount the ECM.
Got my Driving lights (69 style) from Marquez.
Ordered the auto meter/GMPP gauges.. those are on back order so I wont have them for a bit.
Picked up a DSE wiper kit and a DSE master and booster assembly.
Clutch master should be arriving next week.
Next steps... Mount DBW petal to floor, fit the clutch master an weld up a bracket on the petal as needed..
Moc up engine harness and start to build body harness, figure out where I am going to mount ECU and Fuse box...
FAB up dash center for VA 3 knob, top vent and three gauges... Hopefully like what DSE did on Dale Jr's car.
Should be posting Pics next week.

FETorino 05-24-2013 09:07 PM
Hey you're making some great progress there. :thumbsup:

You may make it out here to Silver State this year at the rate you are going.

I'd say weld the bracket on the firewall while your in there.

Looks like a nice parts purchase spree :G-Dub:


All times are GMT -7. The time now is 07:43 AM.
Page 4 of 26 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net