What's up Jake the rendering looks awesome.Good luck with your car.The t56 is in my Trans Am and works mint thanks alot.If there's anything I can do for u just let me know Ill be happy to help.

Pete
 

glad the tranny worked out for you it was nice meeting you, hey i may take you up on that offer, this biatch has to be done for power tour!!!!!
jake

Keep in touch will run the tour together

pic
 

here is one more, gotta dig some more up, that is at ride height, susp will have 3 inches of bump, and i have 3.5 to top of wheelwell or so, will have to roll lip, but i had planned to anyway.

Looks hgood Jake. Mine is in about the same place, but I am not moving as fast as you at the moment.

Mike

thanks
 

yeah i am moving really fast now, will have some IN primer pics shortly, with i hope full mock up.
jake

You're doing great work Jake. That rendering is very cool!


Jody

Wheels look good on that car!

jody
 

thanks alot, i hop ei have fun with the car heres some specs
496 , 4.310 bore, 4.25 stroke, 6.385 rod (.250 longer) h beam cap screw, scat 4340 crankl and rods
cnc new england prepped block
calico coated bearings
ultradyne road race grind solid roller cam, .710 lift, 262, 266 dur @.50 on a 110
dart single plane intake
wiseco custom forgred 10cc pistons to yield 10.96-1 comp
afr cnc 315 heads
pro systems hp1000 prepped carb, machined to flow 940 cfm
ls-1 t-56 , billet syncro keys, kevlar syncros, steel 3-4 shift fork

lateral dynamics 3 link rear susp, ford 9 inch, 3.89 gear
ccw sp 20 wheels, anodized or painted to match stripe 18x11.5 and 18x9.5 , 335/30/18 rear, 275/35/18 front
13.5 front 13 inch read z-51 c6 brakes
spin tech exhaust, 3.5 oval into 3 inch mufflers 3 inch tailpipes
custom alum front air dam, rear alum spoiler

That's quite a list!! I like the wheels too!! :thumbsup:

What SFC's are you using? I didn't see any welded in. What about the front suspension??