You are SUPER HUMAN!!! OMG!! Look at you go!

What a wonderful thing you're doing BTW!

See ya for GG Hall of Fame Tour buddy!

:woot:

The new Alternator showed up today.....so...I decided to get the accessory drive system installed today....Got the Alternator side finished.....started on the Compressor side and realized we didn't order the belt tensioner........Ordered one (Be here Monday).........so.....I decided to get the A/C condenser and Radiator installed.......Moving right along

http://i13.photobucket.com/albums/a2...41AFFE569D.jpg

http://i13.photobucket.com/albums/a2...C308EF2B2B.jpg

http://i13.photobucket.com/albums/a2...2CA0442543.jpg

http://i13.photobucket.com/albums/a2...0930347959.jpg

http://i13.photobucket.com/albums/a2...2B36DE572E.jpg

http://i13.photobucket.com/albums/a2...E13A3D13BC.jpg

Had a little spare time today.........Got the Starter in........got the Fuel line installed up to the fuel filter on the firewall (one fitting short of finishing of course).......and believe it or not .....the Tensioner assy for the belt drive I ordered from Amazon was delivered today (Sunday).......So...I put it on and installed the compressor.....Just need to get the proper belt.......A little bit every day

http://i13.photobucket.com/albums/a2...387FD32803.jpg

They cleaned up nice. You guys are doing some great work on this, nice and neat.

I was going to take a Break for a day and get other stuff done today........Walked into the garage and as I looked at the firewall........(LOL.....can't leave stuff alone ya' Know).......I was unhappy with one of the screws that was holding the A/C firewall plate in position.......Darn !!!........Went in the house and that dam screw was haunting me.......went back out and removed the inner fender panel again and got it fixed correctly..........and I also got all the A/C lines fit and made ........get them crimped tomorrow......

Ken ... good on you for fixing something that bugs you, it's the details that most people don't see! Car is coming along nicely, well done sir :popcorn2:

Absolutely beautiful car! Subscribed to see the progress because its looking REAL good so far! :thumbsup:

Damn it! I could have sent you my crimper set up!! Right now though - I have no clue where it is! Since selling the shop -- and Rudy took home most every tool I owned. I kept enough for one nice tool box for Gwen here at the house. Had I thought about it I should have asked on here who needed what?

Awesome job buddy!

Got the Front drive set-up finished today........Put the crimped A/C lines on and evacuated the system.....Held 30 lbs vacuum.......dug thru the box of Radiator hose pieces and was able to get a bottom hose pieced together......need to do the Auto store torture for the upper one.......the Driveshaft was finished, went and picked it up and installed it.......The old driveshaft couldn't be shortened because of the reduced diameters..........picked up heater hose parts and started on the air intake......

http://i13.photobucket.com/albums/a2...8DF4889D_1.jpg

http://i13.photobucket.com/albums/a2...F64106DE_1.jpg

http://i13.photobucket.com/albums/a2...754368BB_1.jpg

http://i13.photobucket.com/albums/a2...18398D32FF.jpg

http://i13.photobucket.com/albums/a2...FA13E26D47.jpg

http://i13.photobucket.com/albums/a2...94FA64C015.jpg

http://i13.photobucket.com/albums/a2...59133BD0D1.jpg


Moving along............