I've been called many things; among them, "picky".

David

We're going with the Magnum Force front end. Their transformer K member is a very nice piece of gear. Took a break from working on the rockers and got this installed.

https://uploads.tapatalk-cdn.com/201...eb0c14b7f9.jpg

https://uploads.tapatalk-cdn.com/201...5fb578ad80.jpg

Just need to finish out the motor mounts:
https://uploads.tapatalk-cdn.com/201...77a32398a6.jpg

Factory stops removed:
https://uploads.tapatalk-cdn.com/201...931e23b58b.jpg

Back to the rockers.

David

:y0!: Where did you get the 1/2 '' adjusters for the frame table ?

Amazon had a good deal:

Level-It - 1-7/8" Diameter Level Mount with 1/2-13 Threaded Stem https://www.amazon.com/dp/B0029MRUKK..._YOfqzbT35YM8F

Local stores only had 3/8 and smaller, which might have worked, but I didn't want to be weight limited to how much of the car I could assembled on the table.

David

After a summer of off-roading, hiking, and client projects, I have some time to work on the Charger again.

Rockers are open and trimmed and ready for internal reinforcement.

https://uploads.tapatalk-cdn.com/201...7adeaa18c9.jpg

Rear section was chewed up pretty nicely my rust, and deformed at the pinch.
https://uploads.tapatalk-cdn.com/201...5da01c2cd5.jpg

Bent up a repair plate.
https://uploads.tapatalk-cdn.com/201...c22c98b096.jpg

Glad to be back working on it.

David

Very nice work:thumbsup: :thumbsup:

It looks good, and that K member looks pretty stout.

Thanks! I missed working on it.

Appreciate it, and yeah, I’m very pleased with the magnum force K member. It’s not really any lighter, but very rigid.

Some finishing details before welding.
https://uploads.tapatalk-cdn.com/201...feba5d1d49.jpg

https://uploads.tapatalk-cdn.com/201...b4614ec9f1.jpg

For the mopar unibody nuts - this is the only taper, and there are no convoluted reliefs. Still plenty of room for the rear quarter to nest.
https://uploads.tapatalk-cdn.com/201...d6e8551cc4.jpg

.023 wire is loaded. Let’s go to work.

David

Welded. Blended.
https://uploads.tapatalk-cdn.com/201...fe755630bb.jpg

Now to make a cap.
https://uploads.tapatalk-cdn.com/201...1f91306a29.jpg

David

Large day with family. This is about all I could manage to get done with the hour I had early this morning.
https://uploads.tapatalk-cdn.com/201...f0a23e2270.jpg

David