Lateral-g Forums - Project Dorothy

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Project Dorothy (https://www.lateral-g.net/forums/showthread.php?t=6165)

:eek: :thumbsup: :hail:

Hey great work Tracy! Coming along nicely.

Keep it up!

Can you tell me how much the lower bars (that tie into the original spring pockets) go out the side of the frame? I'm interested in finding the most available width clearance in the tubs from fender lip (inside of it) at front of quarter panel wheel opening to what ever will hit first (probably that bar....)
to estimate my leftover space if i ever take the decision on the Q-Link.

You like it?

Lead.

Quote:

Originally Posted by Leadfoot1

I think you are trying to figure out if you can fit those 345's. Well, the 335's mounted on 18x12 wheels are about 13.25" wide. My DSE mini tubs were installed to be about 1/2" wider than normal by moving the cut line in slightly. With this we end up with just a hair over 14" of clearance. The first thing you hit is either the frame or the tub itself not the bar.

I will double check this tomorrow and give a more definittive answer.

-Tracy

Lookin' good! :thumbsup:

Shiny Side Up!
Bill
'72 442 "Inamorata"
www.fquick.com/ProTouring442

Thanks! We are shooting to have it on the ground and rollable by the end of the month...

Underside complete and ready for paint

The pans are done. Quadralink brackets are done. DSE weld-in SF connectors are installed. The underside has been sandblasted and seam sealer applied to all welds. The bottom is ready for paint.

http://www.camarosupercars.com/Photo...s/IMG_0136.JPG

http://www.camarosupercars.com/Photo...s/IMG_0137.JPG

http://www.camarosupercars.com/Photo...s/IMG_0138.JPG

http://www.camarosupercars.com/Photo...s/IMG_0139.JPG