Lateral-g Forums
Page 4 of 7 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Open Discussion (https://www.lateral-g.net/forums/forumdisplay.php?f=14)
-   -   Supercharger is in (https://www.lateral-g.net/forums/showthread.php?t=9212)

mazspeed 04-22-2007 08:20 PM
Quote:
Originally Posted by JamesJ
mazspeed:
I just looked at your site and it is very nice. Is the pulley system in the pic the one that you will be using with the procharger, if so which one is that? I am researching this now so any info would be great. Thanks.

Thank you James. The pulley system is made by March. http://www.marchperf.com/

JamesJ 04-22-2007 08:50 PM
Where did you get your pulley that is on your crank? Did you get it from Frank? Does it have the two ribbed belt provisions? Sorry for all the question just seems like there is not much info around.

Payton King 04-23-2007 07:54 AM
Hard to tell by the pics
 
but would it be easier to re-route your intake tube or move the blow off valve to the other side? If you like the covers, keep them and modify the tube

R67Chevelle 04-23-2007 09:34 AM
Quote:
Originally Posted by mazspeed
Thank you James. The pulley system is made by March. http://www.marchperf.com/

PLEASE..... MORE PICS OF THE PULLEY SYSTEM... IS THE POWER STEERING...

this was why I did not want to go Procharger was due to the accessory system.....:thumbsup:

Blessings,

ProdigyCustoms 04-23-2007 09:53 AM
This is our accessory drive. It is the first one we delivered, and Mikes shop had to spend a couple hours making some adjustments, milling a piece and some other tweaks. Apparently the production pieces were slightly different then the mock up pieces. So we have another kit now we are doing for MDProove, and are making sure the issue is solved before we ship this or any other kits.

The system looks fantastic. It uses a remote reservoir pump. Combined with custom adapters, brackets and pulleys we make. The right (passenger) side of the kit is a March mid mount set up. The left (drivers) side of the kit is all our making.

There is some minor frame crossmember notching required to fit a stock frame. Basically a C relief in the forward crossmember. And apparently on a Fatman Chassis, a sway bar spacer may be required to clear the large Blower drive. Although both these issues are present doing any blower drive.

The entire kit including complete serpentine set up with polished A/C compressor, polished alternator, polished remote PS pump, remote reservoir, P1SC ProCharger, Surge valve, etc, is just under $6,000

I will have more pics later in the week of MDProove's system, using a Holley Stealth Ram, it is going to be HOTTT!!!

R67Chevelle 04-23-2007 11:08 AM
Quote:
Originally Posted by ProdigyCustoms
This is our accessory drive. It is the first one we delivered, and Mikes shop had to spend a couple hours making some adjustments, milling a piece and some other tweaks. Apparently the production pieces were slightly different then the mock up pieces. So we have another kit now we are doing for MDProove, and are making sure the issue is solved before we ship this or any other kits.

The system looks fantastic. It uses a remote reservoir pump. Combined with custom adapters, brackets and pulleys we make. The right (passenger) side of the kit is a March mid mount set up. The left (drivers) side of the kit is all our making.

There is some minor frame crossmember notching required to fit a stock frame. Basically a C relief in the forward crossmember. And apparently on a Fatman Chassis, a sway bar spacer may be required to clear the large Blower drive. Although both these issues are present doing any blower drive.

The entire kit including complete serpentine set up with polished A/C compressor, polished alternator, polished remote PS pump, remote reservoir, P1SC ProCharger, Surge valve, etc, is just under $6,000

I will have more pics later in the week of MDProove's system, using a Holley Stealth Ram, it is going to be HOTTT!!!

If you could either PM me some pics and $ 6,000 seems alot, but it looks so perfect.... PM me when you have more info and I think I would be ready around the end of August. Also, can you sell me the procharge system? Doing a 434 sb, and looking for 10-12lbs boost non-intercooled for now... now I am excited.....:hail:

Blessings,

ProdigyCustoms 04-23-2007 11:13 AM
Quote:
Originally Posted by R67Chevelle
If you could either PM me some pics and $ 6,000 seems alot, but it looks so perfect.... PM me when you have more info and I think I would be ready around the end of August. Also, can you sell me the procharge system? Doing a 434 sb, and looking for 10-12lbs boost non-intercooled for now... now I am excited.....:hail:

Blessings,
Dude, your going to love this, that $6000 includes the ProCharger! Sounds like a deal now doesn't it! however you will be looking at a upgrade to a D1SC for your monster 434. About $6500 with a D1SC

R67Chevelle 04-23-2007 11:41 AM
Quote:
Originally Posted by ProdigyCustoms
Dude, your going to love this, that $6000 includes the ProCharger! Sounds like a deal now doesn't it! however you will be looking at a upgrade to a D1SC for your monster 434. About $6500 with a D1SC

:wow: :wow: :wow: I can't erase the grin on my face now.... I think I better call my heart doctor....:willy: I feel like I just won the Lottery..... The deal is sealed.... I will keep in touch.... :woot:

Blessings,

JamesJ 04-23-2007 01:30 PM
Frank will post the pics in this thread... I guess

https://lateral-g.net/forums/showthread.php4?t=6421

mazspeed 04-23-2007 07:26 PM
I guess Frank took over my questions and answer session. :D


All times are GMT -7. The time now is 11:49 PM.
Page 4 of 7 « First 23 4 56 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net