|
That looks SICK!! :thumbsup:
|
That looks AWESOME! What a difference wheels and tires make.
|
Awsome Job! :hail:
|
I am not going to say Great job,Awesome,or looks good.Because some folks are getting tried of hearing those things.So all I will say is Can't wait to hook up W/U in Charotte this fall.:thumbsup:
|
I am not going to lie
I am diggin' it a pretty good bit.
Scott, at the rate I am going it may fall before I am driving. LOL Hopefully it will be on the ground by next friday. Still waiting on exhaust from coaters. |
Fantabulous! I think that one hasn't been worn out yet and is still available for use :). Hoping maybe when I come back up that way I can check out the finished product.
|
Hay Payton, I know you said your rear end is set up to run stock size Corvette wheels, so if I could ask want width is your rear?? I am looking at doing the same thing with my 69 Camaro also what sub frame are you using?? Thanks for the info.
|
I want to see it on the ground! Looks great :thumbsup:
|
believe it or not
the width is extremely close to a stock 69. 59 inches and I am running small spacers on each side to dial in the exact spacing (1/4 to 1/2). I can get the the measurement of my spacers this week for a total width. Rims are 19x12.5 with a +53 mm offset.
I want to see it on the ground as well |
Very, very nice! :thumbsup:
|
Don't post for 7 days and I am 4 pages back
|
More
|
Dan is a funny guy, cat in the house
|
more
|
more
|
I needed a good place to mount
my regulator, so it was recessed into the tank
http://i1138.photobucket.com/albums/...g/DSCN3156.jpg http://i1138.photobucket.com/albums/...g/DSCN3153.jpg http://i1138.photobucket.com/albums/...g/DSCN3158.jpg |
Payton,
The Camaro is looking killer! Why did Dan lay UPOL down before the Raptor? |
I would assume
as an extra layer of protection from rust.
|
Payton,Look's awesome.:thumbsup: :thumbsup: Man I love that shade of yellow.:D Scott M.
|
Looking great Payton can't wait to see it again. maybe Motorstate again next year?
BTW, Like the cat print, too bad it got covered up :lol: |
It looks great Payton, getting close!
|
Hoping it will be home by next week
Just a little assembly left. Everything is back from the coaters, I put the headers on last Friday.
Need to run new rear brake line, re-route a fuel line and build a new sub box and I should be good to go. Missed a lot of events this year, plan to hit them all next year. |
What do you need a sub box for when you have a built LS to listen to :unibrow:
|
Quote:
|
I guess because I still think I am 16
Had one in there before and with the trunk change, the old box will not fit. I still keep telling myself this is a pro-touring car and not a race car. I debated long and hard whether to put one back in the car. About 60 lbs of box, sub and amp. Then I figured that an extra 60 lbs is not going to make or break any time I lay down at any track.
You are right, the car is so loud I did not have enough power or the right gear to really hear it when I was cruising. I have 800w going to a new 10 inch sub now...should be able to hear it (for short periods) There is a 90% chance that I will make the box/sub and amp removable as a unit for when I am feeling really racy. More to come on that later |
Quote:
|
Getting closer
|
Payton/Dan H.:thumbsup: :thumbsup: :thumbsup:
|
Looks great Payton.
PS: Forget the "stereo" -- the true stereo is the exhaust note.... :D |
Oh, I can promise my car is plenty loud
Still debating on the stereo
Floater with the e-brake going together http://i1138.photobucket.com/albums/.../IMG959545.jpg http://i1138.photobucket.com/albums/.../IMG951212.jpg http://i1138.photobucket.com/albums/.../IMG953946.jpg |
Floater is looking good.:thumbsup:
|
:)Looking very very good
looks like its soon ready:) that will be a very nice car... looking foward to see it...
Kjell |
The bottom of the car is going to be unbelievable with that yellow paint. (as usual) I would defiantly put the stereo stuff back in it.
|
Car is getting closer and closer. Ran into a few issues
But they are sorted out and I should be bringing the car home this friday. I will then only need to run a new rear brake line and fuel line to be able to drive the car. Stereo is going back in. Here are few updates. Recessed the fuel regulator in the tank and had it coated black. Rest of the stuff is in the car and waiting on some fittings for the calipers to clear the shocks.
http://i1138.photobucket.com/albums/...g/DSCN3467.jpg http://i1138.photobucket.com/albums/...g/DSCN3494.jpg |
More
|
Before anyone tells me that my calipers are
upside down. They were thrown on as a mock up. They have been corrected.
It looked like I was going to have all sorts of room when nothing was bolted up. There is all sorts of stuff going on in a small space. I cannot say enough about the work that Dan has done. |
The bottom side of your car looks better than the top side of every car I saw at a local show saturday. VERY NICE!!!!!:thumbsup:
|
Looks awesome Payton. Exhaust turned out great.
|
Excellent Job! :cheers: :thumbsup:
|
Quote:
Nice job Payton. :thumbsup: Now post some damn pics of it with the wheels on the ground, your killing us here :lol: |
| All times are GMT -7. The time now is 09:04 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net