Lateral-g Forums
Page 4 of 19 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Ironworks is building a 1962 Bel-Air with a Blown LSX-376 and Ironworks Chassis (https://www.lateral-g.net/forums/showthread.php?t=34739)

frojoe 12-22-2011 10:59 AM
Quote:
Originally Posted by GregWeld (Post 385547)
Get your sorry ass back out there and take some photos from your KNEES.... so the rest of us can get a REAL VIEW of the stance!!
what he said

mexMan 12-22-2011 12:22 PM
Greg sure is a softie... but anyway...

Great build there! You better drive the oil out of it Greg.

coolwelder62 12-22-2011 12:32 PM
What is more important than what is getting done on the car,is what did you have for lunch.

ironworks 12-22-2011 01:23 PM
Quote:
Originally Posted by coolwelder62 (Post 385579)
What is more important than what is getting done on the car,is what did you have for lunch.

WORD. I bet the angle on these pictures seems fine for us average sized guys like us. Huh Scott?

GregWeld 12-22-2011 07:06 PM
Wow! What a great shot of the top of the trunk lid!

Oh - and there's another great shot of the top of the top!

Oh - and lookie there! A shot of the top of the hood too!

Was there supposed to be a STANCE shot in here somewhere?

coolwelder62 12-22-2011 07:23 PM
It is cold and flu season,U know.Maybe they should not be laying down on that cold concrete floor to get a low stance shot.:unibrow:

GregWeld 12-22-2011 07:27 PM
Quote:
Originally Posted by coolwelder62 (Post 385661)
It is cold and flu season,U know.Maybe they should not be laying down on that cold concrete floor to get a low stance shot.:unibrow:
"THEY"? -- I just want Shannon to go over and take a couple of pics so I can see what the car looks like. :rofl:

coolwelder62 12-22-2011 07:33 PM
Quote:
Originally Posted by GregWeld (Post 385662)
"THEY"? -- I just want Shannon to go over and take a couple of pics so I can see what the car looks like. :rofl:
You need to have some trust in Rodger.He has done this sorta thing before.:lol:

ironworks 12-22-2011 07:52 PM
Quote:
Originally Posted by GregWeld (Post 385662)
"THEY"? -- I just want Shannon to go over and take a couple of pics so I can see what the car looks like. :rofl:
Like i said the car is not in the same condition to take new pics. I might have another stance pic with Kennys 62 tomorrow or tuesday. We are test fitting a first prototype tomorrow after i get parts from the laser cutter.

ironworks 12-22-2011 08:03 PM
Quote:
Originally Posted by GregWeld (Post 385658)
Wow! What a great shot of the top of the trunk lid!

Oh - and there's another great shot of the top of the top!

Oh - and lookie there! A shot of the top of the hood too!

Was there supposed to be a STANCE shot in here somewhere?
Look on the bright side you may never see those things in the real life of Greg Weld. These pics will assure you the roof and hood are as straight as the rockers.

fleet 12-22-2011 08:05 PM
You can't stop Greg Weld, you can only hope to contain him...

Here's one way.

http://i87.photobucket.com/albums/k1...y55_1872-1.jpg

ironworks 12-22-2011 08:08 PM
Quote:
Originally Posted by compos mentis (Post 385670)
You can't stop Greg Weld, you can only hope to contain him...

Here's one way.

http://i87.photobucket.com/albums/k1...y55_1872-1.jpg
Wow nice rendering never seen that before.

fleet 12-22-2011 08:16 PM
Quote:
Originally Posted by ironworks (Post 385673)
Wow nice rendering never seen that before.

It's not a rendering. :)

Bunch of build pics here...

http://www.artmorrison.com/gallery/m...=635&g2_page=3

GregWeld 12-22-2011 08:41 PM
Skeepers --- Did I ever mention to you.... 'er never mind -- my '32 is still there and I'm just going to keep my mouth shut 'til she's done....

<creeping off quietly :_paranoid >

skatinjay27 12-22-2011 08:42 PM
Quote:
Originally Posted by ironworks (Post 385669)
Look on the bright side you may never see those things in the real life of Greg Weld. These pics will assure you the roof and hood are as straight as the rockers.
and all i can say to that reply is...

"winning"!!!!!!!!:lol:

GregWeld 12-22-2011 08:46 PM
Quote:
Originally Posted by skatinjay27 (Post 385688)
and all i can say to that reply is...

"winning"!!!!!!!!:lol:


LOL


SO TRUE!

Vegas69 12-22-2011 08:51 PM
I can tell these two ego maniacs are going to need a very highly paid mediator. :unibrow: :lol:

ironworks 12-22-2011 08:53 PM
Quote:
Originally Posted by Vegas69 (Post 385693)
I can tell these two ego maniacs are going to need a very highly paid mediator. :unibrow: :lol:
Well hello pot, my name is kettle. :D

Al Moreno 12-22-2011 09:34 PM
Quote:
Originally Posted by ironworks (Post 385669)
Look on the bright side you may never see those things in the real life of Greg Weld. These pics will assure you the roof and hood are as straight as the rockers.
:lol: :willy: :rofl: :drama: :_paranoid

fleet 12-23-2011 03:45 AM
Quote:
Originally Posted by GregWeld (Post 385687)
Skeepers --- Did I ever mention to you.... 'er never mind -- my '32 is still there and I'm just going to keep my mouth shut 'til she's done....
Uh yeah, I seem to recall a thread or 2 where that was mentioned.

Your point?

:D



Quote:
Originally Posted by GregWeld (Post 385687)

<creeping off quietly :_paranoid >
:lol:

fleet 12-23-2011 03:58 AM
Quote:
Originally Posted by GregWeld (Post 385662)
"THEY"? -- I just want Shannon to go over and take a couple of pics so I can see what the car looks like. :rofl:
Forget the pics. A live video feed is a more fitting request, King.




:lol:

71RS/SS396 12-23-2011 06:15 AM
When's the 61 Buick chassis going to be done? :_paranoid :unibrow: :D

ironworks 12-23-2011 06:24 AM
Quote:
Originally Posted by 71RS/SS396 (Post 385729)
When's the 61 Buick chassis going to be done? :_paranoid :unibrow: :D
Just need a deposit and a buick.

71RS/SS396 12-23-2011 08:09 AM
Probably be easier and cheaper to just cut the floorpan out and put a Chevy floor in it.

coolwelder62 12-23-2011 08:12 AM
I thought I would check in on the progress,before I head out for Lunch.:D

ironworks 12-23-2011 08:18 AM
Quote:
Originally Posted by 71RS/SS396 (Post 385740)
Probably be easier and cheaper to just cut the floorpan out and put a Chevy floor in it.
It would be interesting to compare my perimeter style frame design to the what would fit under a 61 Buick. HMmmm

71RS/SS396 12-23-2011 08:21 AM
Quote:
Originally Posted by coolwelder62 (Post 385743)
I thiught I would check in on the progress,before I head out for Lunch.:D
Looks like the regularly scheduled programming has been interrupted by the food network again :_paranoid

71RS/SS396 12-23-2011 08:23 AM
Quote:
Originally Posted by ironworks (Post 385744)
It would be interesting to compare my perimeter style frame design to the what would fit under a 61 Buick. HMmmm
I'm not sure what's different about the frame but the front and rear suspensions Buick vs Chevy are completely different.

coolwelder62 12-23-2011 08:25 AM
Quote:
Originally Posted by 71RS/SS396 (Post 385745)
Looks like the regularly scheduled programming has been interrupted by the food network again :_paranoid
:rofl: :rofl: Damn I just Dripped mustard on my shirt from laughing.:rofl: :rofl:

fleet 12-23-2011 08:27 AM
Quote:
Originally Posted by 71RS/SS396 (Post 385746)
I'm not sure what's different about the frame but the front and rear suspensions Buick vs Chevy are completely different.
Those fools!

They refused to embrace the concept of Government Motors. :mad:



:lol:

71RS/SS396 12-23-2011 08:57 AM
Quote:
Originally Posted by coolwelder62 (Post 385747)
:rofl: :rofl: Damn I just Dripped mustard on my shirt from laughing.:rofl: :rofl:
Just smear a little grease and dirt in with the mustard stain and call it abstract art. :D

Ketzer 12-23-2011 09:49 AM
I think this thread took an arrow to the knee...


Jeff-

ironworks 12-23-2011 10:06 AM
Quote:
Originally Posted by Ketzer (Post 385764)
I think this thread took an arrow to the knee...


Jeff-
Did you expect anything less?

fleet 12-23-2011 01:08 PM
Quote:
Originally Posted by GregWeld (Post 385658)
Wow! What a great shot of the top of the trunk lid!

Oh - and there's another great shot of the top of the top!

Oh - and lookie there! A shot of the top of the hood too!

Was there supposed to be a STANCE shot in here somewhere?
Well played Greg! :thumbsup:

On Overhaulin' they punk the car owner, on this one the car owner punks the builder.


:lol:

GregWeld 12-23-2011 08:41 PM
Quote:
Originally Posted by compos mentis (Post 385794)
Well played Greg! :thumbsup:

On Overhaulin' they punk the car owner, on this one the car owner punks the builder.


:lol:


WINNING!!!!


:rofl: :willy: :unibrow: :D :rofl: :willy: :unibrow: :D

RECOVERY ROOM 12-23-2011 10:13 PM
:rofl: go get em tiger

Vegas69 12-23-2011 10:24 PM
Interesting debate between Mr. Weld and the king pin of Ironworks himself.

http://www.xtranormal.com/watch/1285...bletop-build-2

Bryan O 12-23-2011 10:55 PM
^^:rofl: :rofl:

96z28ss 12-23-2011 11:41 PM
Oh thats classic. Good job Todd. This thread is going to be in lat-g hall of fame quick.

ironworks 12-23-2011 11:49 PM
Part one of the PAYBACK
 
PAYBACK never seemed like such a more fitting name

http://www.xtranormal.com/watch/1285...eld-bubble-top


Just kidding guys


All times are GMT -7. The time now is 04:22 PM.
Page 4 of 19 « First 23 4 5614 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net