I had seen it advertised also but never had seen it so thought I would try it,I cut my firewall out and welded it in,I did just weld it over the upper cowl/firewall.I like it really well,still need to drill for my ac/heater hoses and wiring harness.

It's a JCG Restorations part. Chris was hand making these for his first gen customer builds and then he sold the design to Dynacorn to start stamping them. If you go to the JCG Restorations website, they actually sell a billet plate with the A/C ports that fits right in the rectangle stamping on the passenger side.

Here is a 7 year old thread, post #206 shows the first firewall he ever made along with the billet A/C plate.

https://lateral-g.net/forums/showthre...=30020&page=21

Jeff all that horse power on those pallets makes it look like Santa,s work shop for car guys! That’s a nice looking firewall. The engine looks good in there. It’s looking good.

That's it for sure,thanks Greg

Thanks Wayne,I have wanted an LS9 for a long time.

made a little more progress,got the radiator from Entropy,the inner cooler is from C&R Racing.Concept One makes the A/C comp. and bracket which is a great product that is such a tight fit for these engines.http://i1192.photobucket.com/albums/...psqy7suvkm.jpghttp://i1192.photobucket.com/albums/...pstebpjy6f.jpghttp://i1192.photobucket.com/albums/...psh3iyyc9q.jpghttp://i1192.photobucket.com/albums/...psee2gaorf.jpg

^^^^^^^^^^^^^^
#professionalgrade
#Jeffbuilt
#dudeisunstoppable


:thankyou:

Jeff, any reason why you did not choose a C&R radiator to complement their inter cooler? Also, using the Concept one, did it clear the DSE subframe? if so which DSE engine mount kit did you use to achieve the clearance?
thanks
jon

Skip your the best
I already had the Entropy radiator before I bought the LS9,The Concept One setup is great,it has to be used with DSE Subframe and 1.5" setback engine mounts.Its extremely tight but is very nice.

Thanks Jeff! I will make sure to order the correct setback mounts from DSE and the Concept One for my LS9. Your car and parts are looking great:thumbsup:

The guys at Concept One are great to help,you have to trim a small piece on right engine mount,when you get ready pm me your number and I can text you a pic of what to do,their parts are great.

Thanks Jeff!! I will certainly pm you, it should be sometime in the middle of June.
Thanks again
Jon

Uppppdates
 

Jeff, Any updates to this beast ???? Engine looks great in there,

Thanks
Keith

thanks Keith, I have about finished all of the body work , Hopefully be back on it soon.

Sold my project to a great car guy that's been waiting for me to finish it for him,Due to no time to work on it I decided to just sell it as is.He is a member on here and I hope he will update his progress on here.

Whaaaaat
 

Jeff, :hello: you sold your car ??? any plans for another project????
:thankyou:
Keith

Was it a guy from Chicago?

No big projects right now,work is too busy.Bought a couple silverado trucks to play with for now.
Yes is from that area,very nice guy that's waited on me for almost 4 years but I just can't get the time you need to do it the way I want.

I wish you were closer I need wiring done, and I know idle hands do the devils work!So I would just be trying to save you from that.

I would love to be able to help you but believe me my hands are never idle.How are you doing on your car now?