Good Morning All,

Last Week sure was a busy one.
Headed down to Ar Kansas to see the progress on Dad's 57.
Check out the link.
https://lateral-g.net/forums/showthread.php4?t=5538


Dave was able to complete most of the tin work for the Bed.
Without this piece it would have looked incomplete.

http://www.syborgtwinturbo.com/album..._10_14_018.jpg

View from the underside.
This was a tough picture to take since it was sitting on the floor.

http://www.syborgtwinturbo.com/album..._10_14_015.jpg

Mounted the charcoal canister.
I don't want my garage to smell like fuel.

http://www.syborgtwinturbo.com/album..._10_14_008.jpg

Instead of making the bracket simple.
Dave took the time to make it pretty and simple.

http://www.syborgtwinturbo.com/album..._10_14_012.jpg

The linkage is all hooked back up.

http://www.syborgtwinturbo.com/album..._10_14_005.jpg

You can see the bell crank that we are using to change the pull.

http://www.syborgtwinturbo.com/album..._10_14_001.jpg

Cable come out parallel to the manifold.
Still one more bracket to make on the Manifold
and one on the firewall.

http://www.syborgtwinturbo.com/album..._10_14_007.jpg

Just a Quick look through the Back Wheel

http://www.syborgtwinturbo.com/album..._10_14_020.jpg

Have to keep the family involved.
We had my daughter tape up the Billet Specialties Column.

http://www.syborgtwinturbo.com/album..._10_14_028.jpg

We are trying to lay out the gauges and switches.
Also include will be a Cig lighter for the needed Radar Detector.

http://www.syborgtwinturbo.com/album..._10_14_023.jpg

Just a design layout for the Dash. Nothing is set in stone.
We are going to wait to see what Bob Thrash comes up with.

http://www.syborgtwinturbo.com/album..._10_14_025.jpg

Found a suitable location for the American Auto Wire Highway 22 Harness.
This is a very nice kit indeed. Can't wait to wire it.

http://www.syborgtwinturbo.com/album..._10_14_030.jpg

Also found the location for the MSD box. But forgot to take the picture.

http://www.syborgtwinturbo.com/album..._10_14_031.jpg

I quess your going to have to wait till next week to see where we mount that.

looking good marty. :thumbsup:

I love the giant scale bellcrank throttle cable setup. LOL

Mike

Quick Update.

I flew down to Ar-Kansas over the weekend to meet with Kenny & the guy's at Kenny Davis Hot Rods. I have a little medical problem which is going to delay the build. Seems the Doctors feel it's important for them to remove the tumor in my neck something about cancer. Which means this is going to delay the truck by 4 weeks which puts it ready for paint in Late December. This is about the time the Riddler car will be ready for paint and bodywork at Troy's. So my truck would be delayed by at least two months waiting to get into Rad Rides body shop. So I needed to find a painter that is comprable in my eye's. Thus the reason I choose Kenny, I feel like this is going to be a very good Match.

The main reason I don't want to delay the truck by another 2 months is i want to make sure it's ready for Hvaoc in 07 and i actually make it to Sema in 07.

3 weeks from today i'll be in surgery and the bad news is i won't be able to talk for 3 day's - EAK !! and if you know me this is going to be very hard for me. My wife told me she is looking forward to the peace and quiet.

Take care of you first Marty! The Truck comes later. Good luck and I wish you a speedy recovery.

Good luck, Marty. Hope all goes well and you have a speedy recovery.

Marty, take care of yourself. Best wishes for a speedy recovery.