Lateral-g Forums
Page 41 of 71 « First 313940 41 424351 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   My 69 Camaro, "Project Stance" (https://www.lateral-g.net/forums/showthread.php?t=24494)

89 RS 08-16-2013 11:26 PM
Looking good, thanks for sharing the pics and write-up.

67zo6Camaro 08-18-2013 10:21 PM
lateral-g

Flash68 08-18-2013 10:28 PM
Did I miss it before or did you also reinforce the mounting of the torque arm to the housing?

Dang this thing is gonna be right at home in Watts.

67zo6Camaro 08-18-2013 10:32 PM
lateral-g

67zo6Camaro 08-18-2013 10:43 PM
lateral-g

67zo6Camaro 08-18-2013 10:45 PM
lateral-g

Sieg 08-19-2013 10:20 AM
Quote:
Originally Posted by 67zo6Camaro (Post 499958)
A little welding and I was ready to move onto the coilover tabs. I used MIG welding on these cross brace modifications because I wanted to match the SpeedTech's welding process. If I was building this part from fresh metal and from scrap, then I would have used TIG welding.
Considering the caliber of beads you're laying down with the MIG............who cares! :thumbsup:

tones2SS 08-19-2013 04:52 PM
Quote:
Originally Posted by Sieg (Post 500036)
Considering the caliber of beads you're laying down with the MIG............who cares! :thumbsup:
I was looking at that and thinking the same.
Great job.

67zo6Camaro 08-19-2013 05:48 PM
lateral-g

67zo6Camaro 08-19-2013 05:55 PM
lateral-g


All times are GMT -7. The time now is 04:10 PM.
Page 41 of 71 « First 313940 41 424351 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net