Lateral-g Forums - Camaro XV

Page 43 of 150

« First

143

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)

- - Camaro XV (https://www.lateral-g.net/forums/showthread.php?t=39584)

Vince@Meanstreets

09-20-2013 11:58 PM

I get it, nice job Donny.

It won't work in our set up, I may try to hide a plate behind the tubing so its not visable from the trunk side.

Ron in SoCal

09-21-2013 07:25 AM

Yep we just made a close out plate on mine. I did notice Ridetech made a nice alum piece on the G/RS thread.

coolwelder62

09-21-2013 04:17 PM

Quote:

Originally Posted by dontlifttoshift (Post 506009)

I don't know how Mark did it, but we drilled the 2 1/2" hole for the vent can first. then we drill a smaller hole next to it large enough for a grommet that fit the hose snugly. Then file the remaining metal between the two holes to form a "keyhole". Then the order of assembly is shock canister through the big hole in the floor, slide the grommet and hose into the small end of the keyhole, and then install the vent can.

Here is a shot from underneath. The hose looks really close to the exhaust, it is not. The other plus side to doing it this way, is you run the shocks inverted so the rebound adjustment is easily accessible. Especially important with the JRi shocks.

http://frameupwheelworks.smugmug.com.../0/M/044-M.jpg

Donny,is there a build thread on your mustang!!!!

dontlifttoshift

09-21-2013 06:08 PM

Nope. That's Rich Gregory's Camaro that we put together.

69MAROLS7

09-22-2013 06:08 PM

Love the new project!.. Mark you always up the ante and everyone here appreciates the work and ideas you come up with.. Much respect:thumbsup:

dave96dcm

09-24-2013 05:48 PM

Dumb question, can you buy ball receiver cups or is it just a pipe with a cap welded?

coolwelder62

09-24-2013 05:55 PM