don't feel bad the engine guy didn't get the credit either

Hi, just started following your build, glad to heard your doing fine and congrates and the magazine spread.

Okay i'll post some pics - what the heck

I'm my absence Dave was kind enough to order all of the stainless steel fitting for the brakes.
All $600.00 of them I hope this includes the brake lines.

http://www.syborgtwinturbo.com/album..._11_16_018.jpg

Kevin (who's Kevin) retapped the Masters so we could use these fitting on the them.

http://www.syborgtwinturbo.com/album..._11_16_010.jpg

Once again Kevin put a couple tabs on the frame for the brake line.

http://www.syborgtwinturbo.com/album..._11_16_009.jpg

You can't really see the thru-frame piece but it's really cool.
ps - this is the rear brake line.

http://www.syborgtwinturbo.com/album..._11_16_017.jpg

Yep Kevin welded a tab on the Manifold to hold the FPR

http://www.syborgtwinturbo.com/album..._11_16_001.jpg

Pictures not that good but Kevin welded on the Billet Specialties oil bung.

http://www.syborgtwinturbo.com/album..._11_16_003.jpg

One more Bung on the front of the intake Manifold.

http://www.syborgtwinturbo.com/album..._11_16_004.jpg

Kevin Made the lids for the Intake boxes.

http://www.syborgtwinturbo.com/album..._11_16_007.jpg

Okay I think Derrick made the little bracket and Kevin welded it.

We just wanted to add something simple to keep the bar from moving up and down.

http://www.syborgtwinturbo.com/album..._11_16_014.jpg

Dave finished the dash sides. It actually looks like a factory dash at first glance.

http://www.syborgtwinturbo.com/album..._11_16_012.jpg

Kevin made the holes adjust able for the remote wiper so we could get the wiper arms perfectly centered.

http://www.syborgtwinturbo.com/album..._11_16_011.jpg

Okay last picture and it's really hard to see what was done.
Dave welded in a piece of tubing to the inner fender to add some strength.

http://www.syborgtwinturbo.com/album..._11_16_019.jpg

I hope everyone had a great Thanks Giving and more pics to come next monday.

Looking great Marty. It seems as though every little detail that can possibly be taken care of has. Truely a TOP NOTCH build!!!!

okay - quick update

Here is the start of the Billet Hood Hinges.
I want to Thank Paul Kromray for doing the CAD Drawing and Chicago Water Jet for cutting them out for me.

http://www.syborgtwinturbo.com/album..._12_05_001.jpg

We still have to shape the top piece and weld it.

http://www.syborgtwinturbo.com/album..._12_05_002.jpg

Here is the new Stereo System that is going in the Truck.
All parts have been donated by Village Auto - Thanks Again Don.

Kenwood DPX501 Head Unit

http://www.syborgtwinturbo.com/album...DPX501_K_x.jpg

Kenwood KAC-8452 Amp

http://www.syborgtwinturbo.com/album...kac_8452_x.jpg

Kenwood KFC-P707 6.75" Seperates

http://www.syborgtwinturbo.com/album...KFC_P707_x.jpg

Kenwood KFC-4675C 4 x 6 Speakers (rear fill)

http://www.syborgtwinturbo.com/album...fc_4675c_x.jpg

Kenwood KFC-W2510 10" Subwoofer

http://www.syborgtwinturbo.com/album...fc_w2510_x.jpg

That's it for today, I should be going to the shop in the early AM tommorow.
Will have more pics.

looking good

This truck is so well engineered its scary lol :hail: