Update 3/14
 

Nothing too exciting ... my tool for the window nut came in today ... so I figured I'd get the quarter windows polished :thumbsup: Why wait?

http://imageshack.us/a/img526/2346/1303141863.jpg

http://imageshack.us/a/img138/6055/1303141860.jpg

Came out really nice ... wrapped them up and put them away.

Thanks for looking ... should be welding this weekend, AND it's Spring Break -NO SCHOOL next week :thumbsup: just homework!

Finally a side cowl
 

welded in, now that's a good Camaro day:thumbsup:.

Got the passenger side cowl welded in ... little heat, some hammer/ dolly work, and some more heat and she's all good. I'm gonna wait on the outer shell til I can get some undercoat or Lizard Skin on the inside.

http://imageshack.us/a/img28/9853/1303161866.jpg
Welded and hammered in :thumbsup:

http://imageshack.us/a/img203/2594/1303161864.jpg
So that's what it will look like ... almost forgot :relax:

The driver's side will take more work cuz the stamping is off and I have to fill where I sliced to make it fit correctly .... but I will get on it tomorrow fer sure. If the temp is good tomorrow I may spray some epoxy ... we'll see!

Thanks for looking ....

:clap: :cheers: Respect!

Lookin great.:thumbsup: I hope the garage is stayin warm.

Well Done Chief! Good Camaro Day for sure!!

You know, I am pretty blessed with how clean my Camaros body is. At least as far as I know anyway... knock on wood. For me there is always a level of uncertainty. But I tell you what, you know exactly what you have and how meticulous and solid the work on yours is. Be very proud of your work. You set a great example.

Robert

Thanks!
 

Thanks for the compliment, appreciate it :thumbsup:

:thankyou: This past week the temps were in the 50's and then 70 yesterday?? I need the heater in the morning but not for long, should be 50's tomorrow also :thumbsup:

Thanks!
 

:thankyou: :thankyou: I hope you not mind me stealing your Good Camaro Day saying .... but it fits.

I am just doing it the correct way ... hope someone else learns from this thread.

Mind? Heck no! I smiled when I read it.:D

I'm sure I'm not the only one learning from your thread either.

Looks good Chief!

You all need to pass some of that 'Good Camaro Day' karma my way. I purchased trunk lid #5 and it showed up yesterday. Guess what? Didn't fit worth a darn. I haven't even braved trying to get back to work on my front cap. I'm probably going to go talk to a local resto shop and see about getting them to deal with it. I've just lost my patience for it. I'm ready to start block sanding and spraying some color damnit!!

Good day!
 

I appreciate the compliment :thumbsup:

:thankyou: You can have all my karma you need, don't know if it's any good thou :D I bought my deck lid 11 years ago from Ricks and it fit just like the OEM ... guess I lucked out. I wish you luck.

I finished welding the driver's cowl .... what a PITA, made two patches where I had to slice the corners and wrestled it back in place. Weld, hammer/ dolly and more heat and she fits.

http://imageshack.us/a/img534/7797/1303171871.jpg
Good Camaro Day fer sure :thumbsup:

http://imageshack.us/a/img339/928/1303171872.jpg
Finish with some epoxy primer and some undercoat!


I'll finish dressing the welds another time .... I'm beat!

Thanks for looking.... time to :relax: