In this video I go over the Adam's Paint Ceramic Coating.

Overall the Cermaic coating application was very easy to complete - and should provide protection for a long time.



Products/Tools Used: Adam's Ceramic Coat: https://amzn.to/2JcJU4K
Adams Polishes Correcting Compound http://amzn.to/2s23Rzl
Adams Polishes Correcting Polish http://amzn.to/2smm5eq
Adams Polishes Finishing Polish http://amzn.to/2s2e
Add Porter Cable 7424 XP http://amzn.to/2sRUaq1

Thanks everyone for all of your support!

The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

In this video I kicked off the upgraded cooling project for the Edelbrock Supercharger on the C6 Corvette.

The Edelbrock E-Force has a very weak and anemic coolant reservoir design - and needed to be upgraded.

I start this project by setting up the new coolant tank from Moroso.




Tools/Parts Used:
Moroso Coolant Tank: https://amzn.to/2JxEpxJ
Fragola -12 45* Fitting: https://amzn.to/2LmogZc
Fragola NPT to -12: https://amzn.to/2M2Jj43
Fragola-12 90* fitting: https://amzn.to/2JwFgyw
Fragola -12 to Push Lock: https://amzn.to/2M0RQ7G
Loctite Thread Sealant: https://amzn.to/2sFPHFK T

hanks everyone for all of your support!
The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

In this video we finally install the Moroso Ice Tank!

With not too much trouble - we got the new Ice Tank installed - and should help cool down the blower!

Tools/Parts Used:
Moroso Coolant Tank: https://amzn.to/2JxEpxJ
Fragola -12 45* Fitting: https://amzn.to/2LmogZc
Fragola NPT to -12: https://amzn.to/2M2Jj43
Fragola-12 90* fitting: https://amzn.to/2JwFgyw
Fragola -12 to Push Lock: https://amzn.to/2M0RQ7G
Loctite Thread Sealant: https://amzn.to/2sFPHFK



hanks everyone for all of your support!
The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

In this video - I upgrade the last of the Edelbrock E-Force Cooling system. I install a universal Edelbrock Heat Exchanger that is twice the size of the E-Force unit. This should help cool the IAT's - and allow the system to recover quicker when it gets hot.

Tools/Parts Used in this install:
Edelbrock HX: https://amzn.to/2I4MpBo
3/4" Heater Hose Splicer: https://amzn.to/2JRrEz1
3/4" Heater Hose: https://amzn.to/2tnp4FI



Thanks everyone for all of your support!


The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

In this episode - we move the Battery to the trunk to make way for the Moroso Ice Tank.

Tools/Parts Used:
Moroso Battery Terminals: https://amzn.to/2KfWzVK
Moroso Battery Cable: https://amzn.to/2lAlW5U
Braille Battery B2317R
Odyssey Battery Mount



Thanks everyone for all of your support!

The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

We finally got the Corvette back together and headed to our local 1/8th mile track for some test and tune!

Watch the video below for more info.

I know everyone has been wanting to see what this car will now run in the 1/4.

I took the Corvette over to Zmax Dragway for a Test and Tune - and my first run was only 1/10th off my fastest time last year!

I then ran 3 best ET's ever - all back to back to back.

The last run of the night - I ended up spinning the tires and called it a night.

You will also see in the video my IAT times - please check out the video below for more details!



Thanks everyone for all of your support!

The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

Alright guys - long time no update!

In today's update - we test fit a set of new drag wheels on the back of the Corvette.

For more details - watch the video below!


Thanks everyone for all of your support!

The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss

I really enjoyed your thread until you turned it into a youtube channel:(

Hello everyone!

In today's update we pick up a set CTS Spares - and test fit them on the Corvette/SS - and see if they will work out at a set of front skinnies.



Thanks everyone for all of your support!

The Tools I Use: https://www.amazon.com/shop/bonecrrusherss
Follow me on Instagram: https://www.instagram.com/bonecrrusherss
Follow me on Twitter: https://twitter.com/bonecrrusherss
Like me on Facebook: https://www.facebook.com/bonecrrusherss