Looks great! Thanks for the pics.

Lookin' good Marty, :thumbsup: .

Some say better late then never.

I have a bunch of updates to do so i will post them individually

Dave had to reroute one of the air intake tubes to get around the new inner fender.

http://www.syborgtwinturbo.com/album..._12_26_006.jpg

http://www.syborgtwinturbo.com/album..._12_26_008.jpg

We finally made the new lower column mount.

http://www.syborgtwinturbo.com/album..._12_27_041.jpg

Kevin mounted the Power Steering Tank from Billet Specialties

http://www.syborgtwinturbo.com/album..._12_27_042.jpg

It was hard but we finally found a location for the a/c drier.
See if you can guess where it's mounted.

http://www.syborgtwinturbo.com/album..._12_27_043.jpg

Dave also mounted the hood pin in the core support.
Ron & I are working on the Skuff plate for the hood.
Pics very soon I promise.

http://www.syborgtwinturbo.com/album..._12_27_044.jpg

Normally I would say something like more to come next week.
But since I am already 2 weeks behind.

Well someone took the body off my truck.

No actually Dave & Kevin removed it so they could plumb the brake lines.

http://www.syborgtwinturbo.com/album..._12_29_017.jpg

http://www.syborgtwinturbo.com/album..._12_29_018.jpg

http://www.syborgtwinturbo.com/album..._12_29_019.jpg

http://www.syborgtwinturbo.com/album..._12_29_020.jpg

That's it just thought i would post some pics

Just some quick pictures I thought were cool.

http://www.syborgtwinturbo.com/album..._12_29_022.jpg

Close up of the hood pin

http://www.syborgtwinturbo.com/album..._12_29_024.jpg

Added a second battery just in case.

http://www.syborgtwinturbo.com/album..._12_29_025.jpg

still plenty more post to follow

Dave ran all the brake lines while the body was off.

This way they could keep everything tight to the frame.

http://www.syborgtwinturbo.com/album..._12_29_026.jpg

Man I can't wait till the frame is painted.

http://www.syborgtwinturbo.com/album..._12_29_027.jpg

Brake line running over the rear hoop.

http://www.syborgtwinturbo.com/album..._12_29_028.jpg

T-Fitting to get the Drivers Side rear Brake.

http://www.syborgtwinturbo.com/album..._12_29_029.jpg

Quick Shot of the brake line following the frame.

http://www.syborgtwinturbo.com/album..._12_29_030.jpg

This is where the brake line terminates on the frame.

http://www.syborgtwinturbo.com/album..._12_29_031.jpg

yep there will be more posts

While I was in Florida.
I stopped by www.Docskustom.com to have him work on the final dash bezel.
All I can say is what a great guy.

http://www.syborgtwinturbo.com/album..._12_31_004.jpg

http://www.syborgtwinturbo.com/album..._12_31_005.jpg

http://www.syborgtwinturbo.com/album..._12_31_010.jpg

http://www.syborgtwinturbo.com/album..._12_31_012.jpg

http://www.syborgtwinturbo.com/album..._12_31_013.jpg

yep still more.

Really, I had to take picture of the motor while it was out of the truck.

Dave and I worked on a design for the Turbo Support Brackets.
It will follow the same theme as the Billet Specialties Brackets

http://www.syborgtwinturbo.com/album..._01_04_006.jpg

Kevin Boxed in the motor mounts.
Yes, there is a drain hole in the back just in case they get wet.

http://www.syborgtwinturbo.com/album..._01_04_008.jpg

Dave also finished the brake lines in the front.

http://www.syborgtwinturbo.com/album..._01_04_009.jpg

Side shot.

http://www.syborgtwinturbo.com/album..._01_04_010.jpg

Harness Bar is welded.
Looks like it's getting really close to coming home to my shop.

http://www.syborgtwinturbo.com/album..._01_04_011.jpg

What more brake line pics.

http://www.syborgtwinturbo.com/album..._01_04_013.jpg

Just another one of those really expensive t-fittings.

http://www.syborgtwinturbo.com/album..._01_04_014.jpg

Radiator cover.
Trying to stick with the keep it simple theme.

http://www.syborgtwinturbo.com/album..._01_04_035.jpg

Your not going to believe it one more post.