fixed

Nice!:thumbsup:

another update we are on the home stretch, got the nitrous from NX, and it is awesome stuff, will provide detail pics later but brian havins there really set us up with the right stuff the first time.Got the rear passenger floor pans raised and new panels made, got rear firewall sealed and coated, and interior is all in and doing final nitrous install, vinny will be drag racing next monday, he also got slicks and skinnys for it, should run a very low 10 on a 100 shot.
it ran a 7.63 100 8th with 265 18 inch rear tires peddling it the whole way. should be good for high 10;s on motor.
http://i239.photobucket.com/albums/f...p/IMG_0877.jpg
http://i239.photobucket.com/albums/f...p/IMG_0910.jpg
http://i239.photobucket.com/albums/f...p/IMG_0878.jpg
http://i239.photobucket.com/albums/f...p/IMG_0858.jpg
http://i239.photobucket.com/albums/f...p/IMG_0920.jpg

the door in the firewall is access to the air pod connections.

http://i239.photobucket.com/albums/f...p/IMG_0921.jpg
http://i239.photobucket.com/albums/f...p/IMG_0908.jpg

i was just watching the youtube video of the slalom course..that car is awesome!!!

got car done and to vinny, he wen drag racing today, and had a blast, got his drag package wheels from ccw, which are killer wheels, he is running a 26x12 m/h slick in the rear on a 16x11 and a 17x4.5 on the front with a 26x4 radial skinny
he ran 11.05, 10.84 then 5 straight 10.60's with a 10.60 flat at 130mph with a 1.60 short, the 1-2 shift was hitting rev limiter all day, the 2-3,shift was perfect, he is shifting at 6200 motor rev limit is 6800, hes got 1-2 tenths left on motor once dialed in, plus he didn't turn on the happy gas today, we will see what 150 and 200 shot do for it, this is all on air ride air bar, rear susp. will have pics at the track later.
http://i239.photobucket.com/albums/f...p/IMG_0929.jpg
http://i239.photobucket.com/albums/f...p/IMG_0942.jpg
http://i239.photobucket.com/albums/f...p/IMG_0949.jpg

http://i239.photobucket.com/albums/f...p/IMG_0946.jpg
crappy pic showing difference from carpet to raptor liner rear firewall texture
will have better pics

Sweet ride man! Whats the specs on the motor??

4.310 bore
4.250 stroke
scat 4340 crank, 6.385 h beam end cap screw rods
wiseco forged pistons,10cc dome
afr cnc 315 heads angle cut to 108cc,2.25, 1.90 valves
10.9-1 cr
ultradyne solid roller cam,.710 lift, 262,266 [email protected]
isky red zone lifters
manley swedged push rods,custom length
dart single plane intake
pro systems custom built carb, based on hp1000
race pump, mechanical fuel pump
lunati extruded alum roller rockers
idles at 900, and sounds like a high revving sb with the oval spin tech exhaust and pro mod mufflers.
runs on 91 at 35º timing, and hot days some lucas octane boost keeps it from dieseling when shutting off,

That's great! So does all this make you want your car done or what?? ;)