It's in...:unibrow:

:thumbsup: :captain:

Could of used you that's for sure. It's a little tighter now with the road race pan. Went pretty smooth. Tranny is already in as well. :thumbsup:

Jason sent over some of the machining photos today. I'm up late so I thought I'd post them up.

This photo shows the removed factory cam retainer bosses and custom valley screens.
http://i200.photobucket.com/albums/a...9/P2020004.jpg
Jason is checking the comp custom grind for accuracy.
http://i200.photobucket.com/albums/a...zecamshaft.jpg
Here he is checking chamber volume since he ported and cut the head for a valve job. It needed a significant shave to get the compression to 10.23:1.
http://i200.photobucket.com/albums/a...umemeasure.jpg
This photo shows the lathe work he performed to clear the Manley H beams. It also shows the preparation of the lifter bores.
http://i200.photobucket.com/albums/a...dclearance.jpg

This sequence of photos shows him cutting the 5 angle valve job, finished chamber, and assembly.
http://i200.photobucket.com/albums/a...ishedhead2.jpg
http://i200.photobucket.com/albums/a...dassembly2.jpg
http://i200.photobucket.com/albums/a...alveseats1.jpg

The first photo shows the valves in action and the .660 lift.
http://i200.photobucket.com/albums/a...llongblock.jpg
Jason checking piston to valve clearance.
http://i200.photobucket.com/albums/a...tontovalve.jpg
Cool photo of the splayed main caps, callies crank , and manleys.
http://i200.photobucket.com/albums/a...hortblock4.jpg
Little trick, tiny ports in the oil gallies to cool the timing chain. With downard drivetrain slope and acceleration, think it's a great idea.
http://i200.photobucket.com/albums/a...chainoiler.jpg
Jason modifying my Isky Red Zones! My guess is more oil to cool the valve springs.
http://i200.photobucket.com/albums/a...rainoilmod.jpg

Aweome bud cant wait to see the car on the "road":unibrow:

You need to post a video of that bad boy once you fire it up :unibrow:

That's what she said...... Sorry, but I had to do it. ;)

Looks like you're in good hands with that build.

I thought it was, are you in yet. :lol: There will be plenty of video. I plan on attending at least 2 events in the next 4 weeks. I need to get my butt back out in the garage after 4 hours of sleep.