Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   1969 Camaro RS.R - a new project from the OLC Team (https://www.lateral-g.net/forums/showthread.php?t=30550)

nic 07-11-2011 04:31 PM

Car looks Great:woot:

waynieZ 07-11-2011 06:26 PM

James the car is coming along nice, I can't wait to see more.

bdahlg68 07-11-2011 06:32 PM

Quote:

Originally Posted by James OLC (Post 358963)
Pass... my history with composite's is not great. We had removed the roof to replace it (see last months issue of Camaro Performers) and we're leaving it off for now to make the install of the roll cage easier.

Aha. Looks like the side of the roof skin and area where it meets the quarter is on....

ironworks 03-23-2012 08:23 AM

These pics might help bring this thread back to the top.

HMMM Floater

http://i616.photobucket.com/albums/t...23-2012005.jpg
http://i616.photobucket.com/albums/t...23-2012004.jpg
http://i616.photobucket.com/albums/t...23-2012003.jpg
http://i616.photobucket.com/albums/t...23-2012002.jpg
http://i616.photobucket.com/albums/t...23-2012001.jpg

This is the Floater that Speedtech is now selling. Pretty nice stuff here.

KPC67 03-23-2012 09:35 AM

That looks sweet!
:thumbsup:

intocarss 03-23-2012 10:57 AM

That's one sexy rearend you got

ironworks 08-08-2012 10:08 AM

I guess it is about time for another update. We have been plugging away on James's Project. We moved the engine back some 4-5" I think when it was all said and done. This mod required us to just fabricate a complete new firewall. We also taper the sides of the firewall to make the air exit thought the intended side vents a bit easier. We set up to hang the Wilwood pedal assembly with the DBW gas pedal. We constructed a really nice 1.75" rollcage and are currently working on adding the 1.5" supporting bars. The Speedtech torque arm and front suspension are pretty much completely installed. We installed the DSE subframe connectors to go with it also. Upon moving the engine back we also had to clearance the subframe to clear the alternator. Hopefully we will have some mock up wheels so we can see how the 315's on all 4 corners are going to fit. Enough talking here are some pics.

http://i616.photobucket.com/albums/t...-6-2012015.jpg
http://i616.photobucket.com/albums/t...16-2012003.jpg
http://i616.photobucket.com/albums/t...23-2012002.jpg
http://i616.photobucket.com/albums/t...hoppics001.jpg
http://i616.photobucket.com/albums/t...hoppics008.jpg
http://i616.photobucket.com/albums/t...hoppics009.jpg
http://i616.photobucket.com/albums/t...hoppics010.jpg
http://i616.photobucket.com/albums/t...hoppics012.jpg
http://i616.photobucket.com/albums/t...hoppics001.jpg



More to come

ironworks 08-08-2012 10:09 AM

And a few more

http://i616.photobucket.com/albums/t...hoppics002.jpg
http://i616.photobucket.com/albums/t...hoppics005.jpg
http://i616.photobucket.com/albums/t...ppics007-1.jpg
http://i616.photobucket.com/albums/t...hoppics012.jpg
http://i616.photobucket.com/albums/t...hoppics007.jpg
http://i616.photobucket.com/albums/t...hoppics002.jpg
http://i616.photobucket.com/albums/t...hoppics001.jpg

Enjoy

Swain 08-08-2012 10:15 AM

Looks bad ass like always.

Flash68 08-08-2012 10:37 AM

Is that mock up dash in position properly? Is it really going to be that far from vertical or is that just camera lens skew?

Love the flat fabbed firewall with no "stuff" on it. :thumbsup:


All times are GMT -7. The time now is 02:28 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net