My build took a detour.... I've been enjoying my car as I worked on it until it was hit while parked on the street. Finding a 73 grill for a Cuda is next to impossible. Anyways, yes I know solidworks. I work on 2009 but that should be fine for most shops. PM me and we'll figure something out.

Dave

Two 16' I beams serving as base for my jig, got to get them cleaned up and drilled with many holes for adjustability. Almost 6" flange 8"web and 1/4 thick.

http://i54.tinypic.com/dxdyyt.jpg

SBDave let me finalize my jig plan and maybe I can shoot you a drawing to transfer to cad to cut my steel plates out.

Hey guys thought Id post up so progress. I sourced a 2008 Tremec TR6060 rear transaxle from a vette. Media blasted the case and cleaned it up. I am planning on trying to rebuild it myself one of these days and upgrade it to stronger internals.

Lastly here are a couple of pics of my father's R3 stroker motor for his Tube chassis Duster. He is getting very close to having everything completed and off to paint. Enjoy!

http://i51.tinypic.com/2d2f0qw.jpg

http://i53.tinypic.com/2wmjn03.jpg

http://i52.tinypic.com/29za0kw.jpg

and.........

Haha believe me Im working as fast as I can!

I also just ordered 5 gallons of evaporust for my i beams and a gallon of eastwood epoxy primer and catalyst!

there ya go

Im just keeping the updates Rolling!

1 Gallon of Eastwood Epoxy Primer Black
1 Gallon of Eastwood Catalyst
5 Gallons of Evaporust for my I beams and plates!
http://i54.tinypic.com/2wduihf.jpg

Lastly I got a hold of some really trick pieces!
Dodge R5 CNC billet aluminum piston oil sprayers that have 3 jet sprayers able to adjust the amount of oil! These are really neat, they have a CNC hole through the center of the piece and the bolts have hole passages for the oil to flow.
http://i54.tinypic.com/m8zeoy.jpg

http://i55.tinypic.com/52gs44.jpg

nice...........

Those are crazy!