Block sanded the hood and doors

http://img.photobucket.com/albums/v3...ps874de751.jpg

http://img.photobucket.com/albums/v3...psd2078b3d.jpg

Sprayed one coat of SPI black epoxy to seal than sprayed 2 coats of Slick Sand Polyester primer

http://img.photobucket.com/albums/v3...ps44879a45.jpg

http://img.photobucket.com/albums/v3...ps4f014b14.jpg

http://img.photobucket.com/albums/v3...ps9f565e92.jpg

I cannot wait to see how this turns out. If I understand correctly, you have to put a donor VIN on these Dynacorn cars? How does that process work? Moving VIN's around just doesn't sound legit. I'm just trying to understand the process here. Great job on the car BTW!

It comes with a Dynacorn VIN pop riveted on the right fender apron and also under the right sill plate and he will be using that.

The shipment from Dart came and now our engine builder Mike at Competition Motorsports in Sarasota Fl will be busy.

http://img.photobucket.com/albums/v3...ps0b3477b8.jpg

http://img.photobucket.com/albums/v3...psd13e67be.jpg

http://img.photobucket.com/albums/v3...ps07837d45.jpg

http://img.photobucket.com/albums/v3...ps0db0c3c7.jpg

Two coats of Slick Sand on the fenders

http://img.photobucket.com/albums/v3...psd029b185.jpg

Stripped the engine compartment to bare metal than sprayed two coats of SPI epoxy primer

http://img.photobucket.com/albums/v3...ps731eeb0d.jpg

Sprayed one coat of epoxy than two coats of Slick Sand on the body


http://img.photobucket.com/albums/v3...ps5214a384.jpg

http://img.photobucket.com/albums/v3...ps54f323cd.jpg

http://img.photobucket.com/albums/v3...ps2668b679.jpg

Very nice, you guys are making some nice progress on these Mustangs.

Question for you Rusty who's body dolls is this stang sitting on?

I bought mine at Eastwood they seemed at the time to have the best price but it is made by Auto Twirler for a Mustang.

Lot of block sanding

http://img.photobucket.com/albums/v3...ps888896eb.jpg

Couple coats of SPI epoxy

http://img.photobucket.com/albums/v3...ps24681ce5.jpg

The owner sanded the interior and undercarriage himself.

http://img.photobucket.com/albums/v3...ps92d5d7ff.jpg

This is how he looked after sanding

http://img.photobucket.com/albums/v3...psc26ba283.jpg

Sprayed a couple coats of SPI red oxide

http://img.photobucket.com/albums/v3...ps735b6a33.jpg

Fitting the roll bar

http://img.photobucket.com/albums/v3...psc27a40ec.jpg

http://img.photobucket.com/albums/v3...ps04b9caaa.jpg

http://img.photobucket.com/albums/v3...psbf2ccb1b.jpg

Fitting the trim panels

http://img.photobucket.com/albums/v3...ps72d7357d.jpg

Sprayed the bottom of the deck lid and hood Acapulco blue

http://img.photobucket.com/albums/v3...ps65e6ac1e.jpg

mmmmm, Acapulco blue :thumbsup: