Lateral-g Forums
Page 5 of 15 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Race Cars and Modern Pro-Street (https://www.lateral-g.net/forums/forumdisplay.php?f=57)
-   -   1969 Camaro road racer (https://www.lateral-g.net/forums/showthread.php?t=45491)

Damn True 03-27-2014 06:08 PM
Quote:
Originally Posted by Vince@MSperfab (Post 543788)
thanks Brett, its been mostly clean up and getting it up to current safety standards.
There will be a few more changes next year. Cross my fingers.

BTW, cage was put in with no diag bar. :twak:
That got fixed I presume?

Vince@Meanstreets 03-27-2014 06:35 PM
4 Attachment(s)
Quote:
Originally Posted by Damn True (Post 543836)
That got fixed I presume?
It will be eventually, I have to get the rest done and i'll see what kinda time I have left.

I wish we were doing it over from scratch cause its been a chore getting my noz into some spots, the front lower bar took me 45 min to do. laying in the car and finger tip control equals fun. Got 360 but I had to sacrifice a lense.

After 5 hours 45 min..... 60% is welded up. Had to take a break, looking at tig arc too long gives me a migraine, then im no fun to be around.

Sieg 03-27-2014 07:57 PM
I feel for ya Vince, that's tough tedious work and to get rewarded with a migraine is just wrong. :thumbsup:

Would one of these torches help?
http://www.ckworldwide.com/flex-loc.htm

patoke 03-27-2014 08:28 PM
Thanks Vince. :confused18: it does look fantastic. Those welds are beautiful

Rod P 03-27-2014 11:15 PM
Quote:
Originally Posted by Vince@MSperfab (Post 543843)
then im no fun to be around.
when have you ever been fun?????????:stirthepot: did I miss that era?

Vince@Meanstreets 03-27-2014 11:45 PM
4 Attachment(s)
Quote:
Originally Posted by Rod P (Post 543873)
when have you ever been fun?????????:stirthepot: did I miss that era?
haaaa, at least I have a sense of humor.


Hey! where were you today? The toilet papers out in Allens can.

:waveflag:


Just finished the door bars then put the dash back in. It was a rough Thursday. I'll weld in the top of the diagonal Saturday.

Vince@Meanstreets 03-27-2014 11:51 PM
Quote:
Originally Posted by Sieg (Post 543856)
I feel for ya Vince, that's tough tedious work and to get rewarded with a migraine is just wrong. :thumbsup:

Would one of these torches help?
http://www.ckworldwide.com/flex-loc.htm
it happens, it will be worth it when done.

What I need is a shorter lense nozzle....and a 90 degree tungsten. :idea:

I got a great idea for finger control. Anyone wanna loan me 60K to develop and proto-type?? :G-Dub:

Flash68 03-28-2014 12:22 AM
Nice work Vince. Door bars look great.

Sieg 03-28-2014 06:45 AM
Quote:
Originally Posted by Vince@MSperfab (Post 543876)
What I need is a shorter lense nozzle....and a 90 degree tungsten. :idea:
CK90V Flex is the best I could find......is 90 amp rating enough? :sieg:
http://www.ckworldwide.com/master.htm

Check the dimensions page.

Vince@Meanstreets 03-28-2014 10:49 AM
Quote:
Originally Posted by Sieg (Post 543892)
CK90V Flex is the best I could find......is 90 amp rating enough? :sieg:
http://www.ckworldwide.com/master.htm

Check the dimensions page.
not for CM.....I'll keep looking.


All times are GMT -7. The time now is 06:08 AM.
Page 5 of 15 « First 34 5 67 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net