Lateral-g Forums - C6 Weld-On Flange Ends

Page 5 of 13

« First

Last »

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Transmission and Rear End (https://www.lateral-g.net/forums/forumdisplay.php?f=39)

- - C6 Weld-On Flange Ends (https://www.lateral-g.net/forums/showthread.php?t=48782)

mfain

01-24-2015 04:20 PM

2 Attachment(s)

Jay,

I bolted up the largest radial mount caliper and rotor I had (14 inch StopTech 6 piston) to make sure the radial mount bracket would clear the caliper mount tabs - perfect! For those with good eyes, the hub/bearing is a C7 front (no splines).

Pappy

Attachment 52562

Attachment 52563

MillerBuilt

01-24-2015 06:16 PM

Quote:

Originally Posted by mitch_04 (Post 591439)

Absolutely beautiful!

Thanks!

Quote:

Originally Posted by mfain (Post 591452)

I picked mine up yesterday. The quality is as good as it looks in the photos! Thanks Jay.

Thank you Pappy, it was a pleasure talking with you. YOU are a bucket of knowledge!

Pappy

Quote:

Originally Posted by Ron in SoCal (Post 591459)

Great job Jay :thumbsup:

Thanks Ron!

Quote:

Originally Posted by mfain (Post 591490)

WOW! Looks awesome with those Bad Boys!! Thanks again Pappy!

MillerBuilt

01-24-2015 06:22 PM

Pics

Couple more pics with ZO6 Type Caliper & Z06 Rotor

[IMG]http://i35.photobucket.com/albums/d1...ps782b0f18.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d1...ps131830f3.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d1...ps3fc33012.jpg[/IMG]

[IMG]http://i35.photobucket.com/albums/d1...ps8e7c625e.jpg[/IMG]

raustinss

01-25-2015 08:41 AM

So again would this work with the larger ZR1 set up

MillerBuilt

01-25-2015 10:32 AM

Quote:

Originally Posted by raustinss (Post 591546)

So again would this work with the larger ZR1 set up

Yes, this setup will work with your ZR1 brakes. The ONLY thing in question was the e-brake backing plate because I had recalled seeing a different part# for the ZR1. But I just slipped an actual ZR1 rotor hat onto this setup and it fit fine. If you have any other questions please ask.

Thanks, Jay

MillerBuilt

01-25-2015 10:49 AM

***price Increase***

Hello Lat-G People,

As of this Tuesday (1-27-15) I am increasing the price of the "Basic Kits" by $100.00, which now will take them up to $900.00. The "Complete kit price will remain the same at $1550.00 as an incentive to purchase the "Complete Kit".
I was hoping to have a larger interest in the product which would have allowed me to keep the price were it was at, but it seems for now the manufacturing runs will remain too small to yield me any profit and although I enjoy sharing my ideas/products,,,, I cannot do it pro bono :shakehead:
Hopefully you all understand. With that being said, I have sold the first available kits and will be purchasing material Monday to start (3) more. I am expecting to have these available by weeks end for those who are interested. Remember, I am still honoring the $800.00 price up until end of this Monday...

Thank you, Jay

Vince@Meanstreets

01-25-2015 04:06 PM

You should be good after you have a couple kits out and they get reviews.

Hang in there man. I know what its like to double down and hold your breath.

MillerBuilt

01-25-2015 06:37 PM

Quote:

Originally Posted by Vince@MSperfab (Post 591622)

You should be good after you have a couple kits out and they get reviews.

Hang in there man. I know what its like to double down and hold your breath.

I think so to Vince. I think the next sets will go fast. I am also having another set of alignment blocks made this round as I gear up for the shopping frenzy. That way I have two sets to loan out :)

JKnight

01-26-2015 10:04 AM

Hi Jay,

I'm local to you and would consider bringing you my existing 9" rear to have you install this for me. Do you have a rough idea of install cost? I won't hold you to it, not looking for a firm estimate.

Also, If I have non-e-brake C5 Z06 rear brakes on the car now (Kore3), would your complete kit & parking brake work with my existing rear brakes?

mfain

01-26-2015 10:15 AM

Quote:

Originally Posted by JSM (Post 591657)

I think so to Vince. I think the next sets will go fast. I am also having another set of alignment blocks made this round as I gear up for the shopping frenzy. That way I have two sets to loan out :)

Jay,

Have you considered sub-contracting a fab shop to do the installs for you? Someone you could provide the fixtures to and then could recommend or send your customers to have the ends installed? That would keep you from having to enter the fabrication end of the business, unless that is something you want to do. It would also build a dependable fabrication capability with someone who would then have experience with your product, eliminating the trial-and-error scenario with a bunch of different shops with unknown capabilities.

Pappy

All times are GMT -7. The time now is 08:56 AM.

Page 5 of 13

« First

Last »

Show 40 post(s) from this thread on one page