Thanks. The exhaust will exit through the quarter panels. As soon as we get it on the lift and get our Stealth Tank from Rick's in place we will work on mocking it up - at least from the mufflers back.

Stealth Tank from Rick's Stainless -

http://www.onelapcamaro.com/OLC_pics/Ricks%202.jpg

http://www.onelapcamaro.com/OLC_pics/ricks%206.jpg

Front suspension is back in place:

http://www.onelapcamaro.com/OLC_pics/j29%20susp%201.jpg

http://www.onelapcamaro.com/OLC_pics/j29%20susp%202.jpg

http://www.onelapcamaro.com/OLC_pics...0susp%203a.jpg

http://www.onelapcamaro.com/OLC_pics/j29%20susp%204.jpg

Thanks again to Tyler and everybody at ATS!:thumbsup:

Finished the day hanging sheetmetal - again:

http://www.onelapcamaro.com/OLC_pics/drv%20low%201.jpg

http://www.onelapcamaro.com/OLC_pics/drv%20hi%201.jpg

http://www.onelapcamaro.com/OLC_pics/pass%201.jpg

http://www.onelapcamaro.com/OLC_pics/pass%202.jpg

http://www.onelapcamaro.com/OLC_pics/drv%20hi%202.jpg

Looks great! Lets get some color on her!! :yes: :thumbsup:

OLC Axles - MW with a little something extra!
 

Axles for the OneLapCamaro project arrived yesterday. Mark Williams went above and beyond helping us with a special request:

http://www.onelapcamaro.com/OLC_pics/MW%201.jpg

http://www.onelapcamaro.com/OLC_pics/MW%202.jpg

http://www.onelapcamaro.com/OLC_pics/MW%203.jpg

Exhaust for the OneLapCamaro project
 

We had a chance to build the exhaust for the OneLapCamaro project last week. Unlimited Performance in Calgary bent up some three inch out of the ATS Road Race Headers into a X-pipe and then over the Lateral Dynamics 3-link and out. While we're finishing the bodywork we'll clean up the welds and ceramic-coat it.

http://www.onelapcamaro.com/OLC_pics/exhaust%201.jpg

http://www.onelapcamaro.com/OLC_pics/exhaust%202.jpg

Looks good! What else needs done before the teardown for body/paint?

That looks terrific, Jimmy! Tailpipes are 3" also? I love the way they jut out to the quarters, going to look very cool and different.

Mark