Lateral-g Forums
Page 5 of 82 « First 34 5 671555 Last »
Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   My 67 Camaro at Sled Alley (https://www.lateral-g.net/forums/showthread.php?t=59131)

dhutton 06-17-2021 03:47 PM
Quote:
Originally Posted by linenoise (Post 713343)
I got the gearfx full rear end from detroit speed. bought the debur and break in service. came in and filled it with fluid and of course it leaks. nice. brand new parts leaking right off first fill up no fun. Called them and they sent me the seal, of course the wrong one(pinion instead of carrier itself)
They often leak around the studs. Does it have copper crush washers on the nuts?

Don

clill 06-18-2021 06:37 PM
https://uploads.tapatalk-cdn.com/202...7686a8cb99.jpg


Sent from my iPhone using Tapatalk

clill 06-18-2021 06:38 PM
https://uploads.tapatalk-cdn.com/202...47afe75455.jpg


Sent from my iPhone using Tapatalk

Jay Hilliard 06-19-2021 01:02 PM
Quote:
Originally Posted by dhutton (Post 713345)
They often leak around the studs. Does it have copper crush washers on the nuts?

Don
Take the four bottom studs out of housing , put red locktite on them and reinstall. They will not seep anymore.

214Chevy 06-19-2021 02:51 PM
Quote:
Originally Posted by Jay Hilliard (Post 713382)
Take the four bottom studs out of housing , put red locktite on them and reinstall. They will not seep anymore.
Thanks for the insight Jay. I'll try that before even filling mine with fluid.

clill 06-22-2021 07:37 AM
Matt’s working on trans mount. https://uploads.tapatalk-cdn.com/202...3c65f1138c.jpg


Sent from my iPhone using Tapatalk

clill 06-22-2021 07:38 AM
Matt’s working on trans mount.
https://uploads.tapatalk-cdn.com/202...37f23cfdfb.jpg


Sent from my iPhone using Tapatalk

clill 06-22-2021 04:59 PM
https://uploads.tapatalk-cdn.com/202...424fd52d4b.jpg


Sent from my iPhone using Tapatalk

Jay Hilliard 06-24-2021 06:25 AM
Superb craftmanship by Matt and team as always.

EVIL SS 06-24-2021 07:04 AM
The car and project looks great! Any reason why you didn't use the Holley crossmember mount?

Also on your rear frame picture, how wide of a tire are you going to run? Those didn't look like all the parts that come in the DSE tub kit. Looks like you have a little something cooler happening there :)


Thanks,
Dave


All times are GMT -7. The time now is 08:41 AM.
Page 5 of 82 « First 34 5 671555 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net