![]() |
This project would turn anyone into a truck lover.
Very clean and neatly done, but mostly just way cool! |
1 Attachment(s)
Attachment 80043
Bed is back from the body shop. Had a little rust repair done, some patina matching on the wider inner fenders, undercoat on the bottom and matte clear. I also got all new trim for the truck. |
4 Attachment(s)
Chassis is ready for the body. Just got the exhaust all finished up and fuel lines ran. Fuel cell by DB Rods and custom driveshaft.
The body has all the rust repair finished and has been matte cleared. The interior and firewall will be painted the OG blue with matte clear also. Thanks in advance for pic flip. |
1 Attachment(s)
Out in the sun after matte clear. In the background the Camaro was waiting for the C10 to come out so it can go in the booth.
|
2 Attachment(s)
|
Well Hands Down this is one of my favorite projects to date !!!
I hope to see this in person one day. |
1 Attachment(s)
Attachment 80476
I wanted the truck to sit lower than it was. Had to change to a shorter spring front and rear and added some 0 rate take up springs. Also flipped the front coil over to where the adj nut was up top. It bottomed out on the lower arm with 2” of shock body left when full droop. Need to adjust the trim and the sheet metal still but it’s getting there. |
B E A utiful!!!
|
Wow. This is another sick build you have .
|
1 Attachment(s)
A little wiring action. Should be running by next week.
|
| All times are GMT -7. The time now is 02:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net