post up some pics of the paint process.PLEASE!!!!!!

Great job Billy..........

My favorite thread :)

Joe,

You gotta get in line behind me HA!

Uh oh, does this mean we have to fight now? Hehe

Heres two update pics of the body.

http://i326.photobucket.com/albums/k...r/DSC03508.jpg

http://i326.photobucket.com/albums/k...r/DSC03510.jpg

Very nice work. This is going to be an awesome car.

What engine/trans angle do you have?

...I cut up my trunnel for the T56 and will be raising my diff a couple inches, so I'm thinking in order to get the 3* or less for the u-joints, the trans should be as flat as possible...?

Right now the driveline angle set at 2.7*. I know when i first cut the tunnel to fit the trans. The slip yoke was actually sticking through the floor. Thats when i decided to raise the whole tunnel. Hope that helps

That makes sense. When I jacked the trans up to from 4 to around 2*, it was obvious that the whole tunnel would have to go.

I need to get it at around 2* for the bottom to be level with the bottom of the subframe rails, but it also seems like I was having to jack it up really high/flat angle in order to get this, thanks for the confirmation!

I wanted to get the trans close to flat so that my u-joint angles wouldn't be all out of whack in with a tucked differential, but the trans has to be raised sooo much in order to get it near 0*.

Catching up on some small things. Got the front tie downs on the subframe, and made up an expansion tank for the rearend.

http://i326.photobucket.com/albums/k...r/DSC03530.jpg

http://i326.photobucket.com/albums/k...r/DSC03531.jpg

http://i326.photobucket.com/albums/k...r/DSC03532.jpg

http://i326.photobucket.com/albums/k...r/DSC03533.jpg

Very nice work it looks great.

WTF that is a hell of a teaser shot bro you gotta do more than that please

OK that's just not cool.... we need MORE pics!!!!!

Sweet!

This car is going to be killer! :thumbsup:

Damn Billy - - - - - -

That's all I can say is DAMN!

Heres a couple more shots of the frame. It's finally back together for the final time.:faint: I'll try to keep teasing to a minimum :D





http://i326.photobucket.com/albums/k.../brakeline.jpg

http://i326.photobucket.com/albums/k...iver/sub-1.jpg

VERY NICE Billy!!!:thumbsup:
Looking real good bud. Keep us posted.:thumbsup:

Those brakes look awesome. I thought you were running Fikse's profile 13's? these look cooler :hail:

Thanks, Still have the Fikse's, but the car started to go another direction and we needed wheels to follow.

Billy the project look's great.Doing a awesome job.Very well Engineered.:thumbsup:

Is that Sikkens Rally Black on the subframe??? Looks awesome, and your workmanship is outstanding...

It looks like a work of art, very nice!

That is looking really good...need more pictures!!

The attention to detail on this thing is fantastic! One of my favorite Lat-G builds. I'm currently helping a friend of mine with is 74' and I referred him to this thread for some inspiration. He went nuts over your work!

On a side note, is there any place with more on the Mustang I keep seeing in the background?:D

Nova In-veee
 

Billy; just went though the tread again.Man I hope my nova comes out half as nice as your's.Really awesome work & great engineering & design.Scott.:thumbsup: :cheers:

Billy that car is off the hook your skills are amazing keep it up:yes:

Prepped the fuel tank for final assembly.

http://i326.photobucket.com/albums/k...river/tank.jpg






Thanks Scott, Hopefully in a couple months I'll be able to drive and test out all the designs put into it. Especially on the track :woot:

Billy; You were signed up for hastings, but now it's at road america are you still going.It's a real long drive for me.I dont know if I will make the drive unless Mark want's to drive the car.Really looking forward to seeing your nova.Keep us posted.Scott.

Awesome job on the cooler set up.

Love this Build Billy. Awesome work buddy :hail:

If everything goes smooth and the car will move under it's own power we would like to have it there to shake down.:drive: I'll know for sure in the next four weeks.

Where are you at in Ortonville? I just moved from there ( sort of, I still own the house there) 2 years ago. I've never seen your shop. Nice project by the way!
Tim

Billy;Just keep leaning forward w/ your head down and working hard.Good luck.Scott:thumbsup: :thumbsup: .

Hey Tim, We're about a mile and a half east of the villages downtown.

Thanks Scott, Spring fever is starting to hit. Giving more motivation to keep pushing to get it done.

Love the build. :thumbsup:

What is with the cooler mounted on the fuel tank? Is that going to cool the fuel?

Very nice,Very nice!

Look's like the cooler for the rear diff.