|
More questions about the label maker.... what labels are you using? Is it actually a tube that you are sliding over the wire then the clear heat shrink over that?
Saw the link for the actual label maker..... |
Quote:
The good news is you’re printing directly on the heat shrink. Then you slide the clear heat shrink over the shrunk printed yellow heat shrink. https://uploads.tapatalk-cdn.com/202...92c62971a0.jpg https://uploads.tapatalk-cdn.com/202...56a16efeb5.jpg https://uploads.tapatalk-cdn.com/202...a42db35b22.jpg Sent from my iPhone using Tapatalk |
Finishing Up the Ground Wire (( 03-19-23 ))
Making the final ground wire termination.
http://garagescene.net/_data/i/uploa...96c805a-me.jpg http://garagescene.net/_data/i/uploa...a796530-me.jpg Don't cut it to short...Don't cut it to short...Don't cut it to short... http://garagescene.net/_data/i/uploa...f76cbc5-me.jpg Reference mark for the terminal orientation. http://garagescene.net/_data/i/uploa...4e849f7-me.jpg http://garagescene.net/_data/i/uploa...1b7cbcd-me.jpg http://garagescene.net/_data/i/uploa...c0d35e6-me.jpg http://garagescene.net/_data/i/uploa...8aa888f-me.jpg http://garagescene.net/_data/i/uploa...2845a84-me.jpg Since I can't find my 12 point sockets I am going to temporarily use these. http://garagescene.net/_data/i/uploa...56cfe25-me.jpg I need to change the angle for this Ring terminal. http://garagescene.net/_data/i/uploa...f0c1e1a-me.jpg This ground runs up to the block. http://garagescene.net/_data/i/uploa...3790eb2-me.jpg http://garagescene.net/_data/i/uploa...c806d25-me.jpg http://garagescene.net/_data/i/uploa...f05db49-me.jpg |
Week of March 19th - Task List (( 03-19-23 ))
You all know I like my lists so I made another one for this week.
http://garagescene.net/_data/i/uploa...400b2a2-me.jpg First up I am finally securing the heaters hose in the inner fender. http://garagescene.net/_data/i/uploa...c5cda49-me.jpg http://garagescene.net/_data/i/uploa...56d3037-me.jpg http://garagescene.net/_data/i/uploa...c682c0e-me.jpg Close up view http://garagescene.net/_data/i/uploa...6140085-me.jpg More needed parts from ICT Billet http://garagescene.net/_data/i/uploa...8cc7054-me.jpg http://garagescene.net/_data/i/uploa...e1349c2-me.jpg Now that I have all the pieces I need to make the connection I just need the balls to cut the hoses. http://garagescene.net/_data/i/uploa...6840edc-me.jpg Well I couldn't do it so I moved on to the battery ground wire that is now neatly tucked under the battery tray. http://garagescene.net/_data/i/uploa...c5a7f7f-me.jpg http://garagescene.net/_data/i/uploa...7e360b9-me.jpg With the battery wire sitting so close to the lower radiator hose I decided to wrap it in DEI Heat Wrap. http://garagescene.net/_data/i/uploa...baecb98-me.jpg http://garagescene.net/_data/i/uploa...43c21a4-me.jpg Eak look like he wants to call it a night. http://garagescene.net/_data/i/uploa...53ffb12-me.jpg |
Final Autometer Clock Wiring (( 03-19-23 ))
I am pulling power and lights on from the headlight switch for the clock.
It has been a long long time since I center stripped a wire. http://garagescene.net/_data/i/uploa...529cf49-me.jpg I twist connected the wires and the Autometer Clock powered up. Yahooooo http://garagescene.net/_data/i/uploa...22293d6-me.jpg Of course I labeled everything first. http://garagescene.net/_data/i/uploa...f46af28-me.jpg My new desk for the next twenty minutes http://garagescene.net/_data/i/uploa...2dfedb9-me.jpg |
Marty,
What’s nice with the simplicity of your build is that on a road trip you can pull into any Chevy dealer if you need repairs! :peepwall: Btw-great Remy pic… |
Quote:
|
^^^^^
Ok McFly…I really like your dash clock! :P https://i.postimg.cc/hGdFJ3FX/2795-D...2525-F5-DF.jpg |
2nd Chance End of the night Task List 03-19-23
Once I get through a section of the build I write myself a new task list which helps to keep me focused. (( !! Squirrel !! ))
http://garagescene.net/_data/i/uploa...400b2a2-me.jpg It also helps with my memory issue's |
Keeping notes is a very good idea, especially since many of these projects are done over a long period of time.
|
Vintage Air Hose Final 03-20-23
I am finally finishing up the Vintage Air hose routing.
More Mag Daddy mounts with Velcro straps http://garagescene.net/_data/i/uploa...c5cda49-me.jpg http://garagescene.net/_data/i/uploa...56d3037-me.jpg http://garagescene.net/_data/i/uploa...c682c0e-me.jpg http://garagescene.net/_data/i/uploa...6140085-me.jpg I need to make the final cut and yep I am chiken chit !! http://garagescene.net/_data/i/uploa...e1349c2-me.jpg http://garagescene.net/_data/i/uploa...6840edc-me.jpg http://garagescene.net/_data/i/uploa...ad21e98-me.jpg Routing the battery wire for the last time I hope http://garagescene.net/_data/i/uploa...baecb98-me.jpg http://garagescene.net/_data/i/uploa...43c21a4-me.jpg Remy Picture for Skip http://garagescene.net/_data/i/uploa...53ffb12-me.jpg more to follow |
Battery Hot Protection (( 03-21-23 ))
Due to the location of the Battery Hot Wire I am going wrap a small area of the wire in DEI Heat Wrap and will
then add a thin abrasion wrap to protect the wire and make it black so it disappears in the engine bay. http://garagescene.net/_data/i/uploa...9b508d5-me.jpg http://garagescene.net/_data/i/uploa...398699c-me.jpg I am going to shorten the DEI Heat wrap and install the abrasion wrap once it gets past the lower radiator hose. http://garagescene.net/_data/i/uploa...f808e20-me.jpg http://garagescene.net/_data/i/uploa...f943792-me.jpg http://garagescene.net/_data/i/uploa...6828756-me.jpg http://garagescene.net/_data/i/uploa...59c4180-me.jpg The cool part is it is also Heat Shrinks http://garagescene.net/_data/i/uploa...da69ca4-me.jpg http://garagescene.net/_data/i/uploa...0af91b8-me.jpg http://garagescene.net/_data/i/uploa...3d38d39-me.jpg |
The Big Brown Truck (( 03-23-23 ))
The Big Brown Truck made a visit to my house and dropped off these very nice door panels
http://garagescene.net/_data/i/uploa...156679d-me.jpg http://garagescene.net/_data/i/uploa...63d0cea-me.jpg Now they are safely stored in my attic office http://garagescene.net/_data/i/uploa...4651113-me.jpg |
Thanks
Thanks for taking the time to post all of this information!
|
Battery Hot & Vintage Air Heater Core Hose Final Connection (( 03-25-23 ))
Today I will be working on the Battery Hot and the Vintage Air Heater Hose with the ICT Billet Hose Connectors.
http://garagescene.net/_data/i/uploa...aefea20-me.jpg I mocked up the wire routing using Velcro straps which will eventually be replaced with Heat Shrink Tubing. http://garagescene.net/_data/i/uploa...e32e63f-me.jpg http://garagescene.net/_data/i/uploa...dbbee3d-me.jpg One down One to go http://garagescene.net/_data/i/uploa...8b1c014-me.jpg Now the fun and scarry stuff. One wrong cut and I am screwed. http://garagescene.net/_data/i/uploa...819297c-me.jpg http://garagescene.net/_data/i/uploa...c0201c4-me.jpg Please be right... Please be right http://garagescene.net/_data/i/uploa...a317ec2-me.jpg The fun looking one http://garagescene.net/_data/i/uploa...662a6c5-me.jpg If I screw this up I have to remove the inner fender to replace the hose. http://garagescene.net/_data/i/uploa...a614b05-me.jpg For reference http://garagescene.net/_data/i/uploa...032b918-me.jpg This is going to be fun. http://garagescene.net/_data/i/uploa...da34625-me.jpg AC Line Cut !! http://garagescene.net/_data/i/uploa...3bdfc72-me.jpg http://garagescene.net/_data/i/uploa...23cf214-me.jpg http://garagescene.net/_data/i/uploa...22485b8-me.jpg |
I really appreciate all of the pics w/ part numbers and product tags. This will help others !
|
Thank you for the detailed post and including the part numbers
|
Holley Digital Dash Wiring (( 03-26-23 ))
Have I ever told you guys how much I love wiring...
http://garagescene.net/_data/i/uploa...aaffa0a-me.jpg This time I took out the battery http://garagescene.net/_data/i/uploa...ed8ee7a-me.jpg I love these butt connectors http://garagescene.net/_data/i/uploa...b939033-me.jpg Since I am not using this ground wire I just capped it off. http://garagescene.net/_data/i/uploa...4650a5e-me.jpg I need to rewrap the headlight harness http://garagescene.net/_data/i/uploa...7a7817b-me.jpg Soon the steering wheel will be removed as it always seem to be in the way. http://garagescene.net/_data/i/uploa...e070910-me.jpg What a mess !!! http://garagescene.net/_data/i/uploa...e6b4afe-me.jpg |
Holley Digital Dash Wiring - 2 Days Later (( 03-28-23 ))
I finally had time to get back out in the garage and work on the car.
I am holding the Autometer Clock harness and trying to decide where I am going to route it. http://garagescene.net/_data/i/uploa...2068ff9-me.jpg Loom is secured down with a Mag Daddy wire clip http://garagescene.net/_data/i/uploa...884df27-me.jpg http://garagescene.net/_data/i/uploa...421f17f-me.jpg I wired it into the nearby circuit breaker http://garagescene.net/_data/i/uploa...7336150-me.jpg I relocated the dash ground ( per Holley instructions ) to the Kick Panel Ground Stud http://garagescene.net/_data/i/uploa...5757e04-me.jpg http://garagescene.net/_data/i/uploa...4078768-me.jpg http://garagescene.net/_data/i/uploa...4ed97a2-me.jpg I ran the Holley Dash wires through the Mag Daddy mounts to keep it nice and tidy. http://garagescene.net/_data/i/uploa...8f7c7f4-me.jpg |
Do you have a part number for the door panels??
|
1 Attachment(s)
Quote:
|
It's all going in for the last time I hope. (( 04-01-23 ))
Here we go !!!
http://garagescene.net/_data/i/uploa...ea0fa48-me.jpg First up is to install the Vintage Air Unit. http://garagescene.net/_data/i/uploa...a74e717-me.jpg Since I have no hair on my head I started wearing a very thin skull cap from Headsweat. It's not a true Bump Cap so l am calling it a Tap Cap as it gives me warning that I am about to hit my head on something. http://garagescene.net/_data/i/uploa...49751c5-me.jpg I sprayed the drain hose with WD40 Silicone to help it slide through the floor drain grommet. http://garagescene.net/_data/i/uploa...091db8a-me.jpg Of course the fun part is installing all of the nuts. http://garagescene.net/_data/i/uploa...977ccbe-me.jpg It's hopefully hanging for the last time. http://garagescene.net/_data/i/uploa...956bf8c-me.jpg http://garagescene.net/_data/i/uploa...9abaaeb-me.jpg I double nutted the Relay's to make sure they don't fall off. I had planned to use a Nylock nut like I did on the other's but felt it might be brutal to have to remove while laying under the dash. http://garagescene.net/_data/i/uploa...e5290e8-me.jpg I am stilling trying to decide if I am going to run the Neutral Safety Switch wiring under the carpet. However, I am going to use the Orange & White wire for my under dash lighting. http://garagescene.net/_data/i/uploa...1c44832-me.jpg A small feeling of accomplishment http://garagescene.net/_data/i/uploa...bb97729-me.jpg Honey I am going in...hopefully for the last time. http://garagescene.net/_data/i/uploa...5d63a6e-me.jpg http://garagescene.net/_data/i/uploa...ac16dc4-me.jpg |
Terminator X Bracket (( 04-01-23 )) Updated !!!!
Holy Crud that is a mess of wires.
http://garagescene.net/_data/i/uploa...e9d4c9c-me.jpg A long long time ago I made this really cool bracket to mount the Holley ECU and today hopefully will be the last time I hold it in my hand. http://garagescene.net/_data/i/uploa...bab536b-me.jpg Since the top two bolts will be difficult to reach I am just going to install studs to support the ECU. I am even add wing nuts. http://garagescene.net/_data/i/uploa...cb8252c-me.jpg Test Fitting the bracket. http://garagescene.net/_data/i/uploa...dd537d9-me.jpg I will be using the weld studs to hold the bracket. http://garagescene.net/_data/i/uploa...7d04a65-me.jpg Modified Weld Stud http://garagescene.net/_data/i/uploa...a3ce1e6-me.jpg Test Fitting http://garagescene.net/_data/i/uploa...a3f02c4-me.jpg Removing some of the Powder Coating. http://garagescene.net/_data/i/uploa...b85e19e-me.jpg Bonding the four studs and now it is Taco Time. http://garagescene.net/_data/i/uploa...c528d79-me.jpg http://garagescene.net/_data/i/uploa...a7632bd-me.jpg http://garagescene.net/_data/i/uploa...35a97a9-me.jpg I need to shorten the studs just a little. http://garagescene.net/_data/i/uploa...d7fc493-me.jpg Opps http://garagescene.net/_data/i/uploa...d4cc5aa-me.jpg http://garagescene.net/_data/i/uploa...5008fc9-me.jpg Remy Approved !!!! http://garagescene.net/_data/i/uploa...63dd7f4-me.jpg and yes that was him trying to get me to go for a walk, which we did. Bracket Mounted http://garagescene.net/_data/i/uploa...e6e01bc-me.jpg ECU Mounted http://garagescene.net/_data/i/uploa...5913ae3-me.jpg |
Quote:
Thank you! |
Great doggo…great thread…and I’m here to announce you’ve been named Rotarian of the Year!
Oops… :wrongforum: :P |
Neutral Safety Switch Wiring (( 04-02-23 ))
Well, I was going to install the dash and it seems I can't find the clips !!
http://garagescene.net/_data/i/uploa...d100616-me.png Instead I will work on the final wiring. Always make sure you take a picture of how the wires are run. http://garagescene.net/_data/i/uploa...ec8e081-me.jpg http://garagescene.net/_data/i/uploa...5f72234-me.jpg http://garagescene.net/_data/i/uploa...cd7be00-me.jpg http://garagescene.net/_data/i/uploa...7d38d78-me.jpg http://garagescene.net/_data/i/uploa...13a5212-me.jpg Loom has been sleeved for protection under the carpet http://garagescene.net/_data/i/uploa...d1ca8bf-me.jpg http://garagescene.net/_data/i/uploa...d79e66c-me.jpg http://garagescene.net/_data/i/uploa...ceedf02-me.jpg |
Road Trip and Dash Pad Install (( 04-04-23 ))
Thankfully D&R Classics is close enough for me to drive to so I picked up the needed clips for the Dash Pad install. (( 04-03-23 ))
http://garagescene.net/_data/i/uploa...fb9ecef-me.jpg http://garagescene.net/_data/i/uploa...a24adac-me.jpg 04-04-23 So this is strange the outside studs are metric and the inside studs are standard. http://garagescene.net/_data/i/uploa...024ef29-me.jpg Not any more !!! http://garagescene.net/_data/i/uploa...b06fb96-me.jpg I noticed the outside edges of the leather needed some adhesive so I decided to tackle this small project and call it a night. http://garagescene.net/_data/i/uploa...e6ef1ba-me.jpg If you don't own a pair of these I suggest you buy a pair as they will precisely cut paper and then cut thin sheet metal. I have been using these for months and they still work like new. http://garagescene.net/_data/i/uploa...d3e8499-me.jpg http://garagescene.net/_data/i/uploa...d3e8499-me.jpg |
One Day Later Dash Pad Install...Finally !!! (( 04-05-23 ))
This is big as the blue tape is finally coming off the metal part of the dash.
http://garagescene.net/_data/i/uploa...d056188-me.jpg I loosely installed all of the clips to make it easier to install the dash pad. http://garagescene.net/_data/i/uploa...2564328-me.jpg Remy picture for Skip. We all know what he is thinking "When is he going to finish this car !!! " http://garagescene.net/_data/i/uploa...8967515-me.jpg I gently placed the dash in the car since I will be doing it solo. http://garagescene.net/_data/i/uploa...768abb1-me.jpg I tried to physically push the dash pad in to engage the clips and that didn't work at all. So, I moved to Plan B and removed the all of the clips except the two middle clips. This allowed me to push the dash pad in and fell like it wasn't going to fall on me while I laid under the dash and put the clips in and then slid the studs into the clips. It's very important not to tighten any of the nuts till all of the clips are installed. http://garagescene.net/_data/i/uploa...db53a68-me.jpg Well it looks like I am going to illuminate the Fasten Seat Belt Light as I like how it looks. http://garagescene.net/_data/i/uploa...d3886ec-me.jpg http://garagescene.net/_data/i/uploa...6105b4a-me.jpg Last few nuts are now tight and I did install Nylock nuts over the nuts to make sure they don't come loose. Looking in where the Dash surround will be I am very happy with my wiring as it is all easily accessible. http://garagescene.net/_data/i/uploa...a715fac-me.jpg http://garagescene.net/_data/i/uploa...1144e68-me.jpg http://garagescene.net/_data/i/uploa...722b8b2-me.jpg Calling it a night !! http://garagescene.net/_data/i/uploa...6d55109-me.jpg |
Classic Dash Surround Holley Digital Dash & Autometer Clock (( 04-06-23 ))
It's time to make the Classic Dash surround fit into my dash area due to the leather wrap.
http://garagescene.net/_data/i/uploa...54df351-me.jpg The first thing I need to do is remove the Headlight Switch, Digital Dash and Autometer Clock. http://garagescene.net/_data/i/uploa...42974fc-me.jpg Instead of shaving a couple millimeters off the supplied bracket I chose to install two washer. On final install a star washer as it will prevent the bolts from coming loose. http://garagescene.net/_data/i/uploa...5e4c206-me.jpg All parts safely stored back in the box http://garagescene.net/_data/i/uploa...f2931b6-me.jpg Time to start slowly trimming down the surround. http://garagescene.net/_data/i/uploa...50ad4c2-me.jpg http://garagescene.net/_data/i/uploa...372a147-me.jpg As you can see I removed a lot of material. http://garagescene.net/_data/i/uploa...feb614f-me.jpg I need to enlarge the hole in the headlight switch and ended up pulling out the special drill bits to get it nice and tight. http://garagescene.net/_data/i/uploa...a4e6b3e-me.jpg http://garagescene.net/_data/i/uploa...636e62a-me.jpg These are the sharpest drill bits I have ever used and if you run your finger over them it will definitely cut them. http://garagescene.net/_data/i/uploa...4f5f1f2-me.jpg http://garagescene.net/_data/i/uploa...3b9c959-me.jpg http://garagescene.net/_data/i/uploa...0363e51-me.jpg |
Vintage Air Drain Routing (( 04-06-23 ))
I need to route the Vintage Air drain away from the header so up and over the frame rail we go.
http://garagescene.net/_data/i/uploa...41da76b-me.jpg http://garagescene.net/_data/i/uploa...521f669-me.jpg http://garagescene.net/_data/i/uploa...a4af884-me.jpg |
Classic Dash Final Install (( 04-07-23 ))
Quick trip to the local Ace Hardware from more supplies
http://garagescene.net/_data/i/uploa...51c0c95-me.jpg I needed to pick up a piece of flat stock so I could install the dash surround as the holes don't line up and also need a spacer. http://garagescene.net/_data/i/uploa...689f412-me.jpg I can't believe I haven't removed the steering wheel as it is been in the way so many times !!! http://garagescene.net/_data/i/uploa...d545d0e-me.jpg http://garagescene.net/_data/i/uploa...5d9bd91-me.jpg http://garagescene.net/_data/i/uploa...4c65187-me.jpg http://garagescene.net/_data/i/uploa...298fe2a-me.jpg Off to Home Depot for more hardware. http://garagescene.net/_data/i/uploa...500b57b-me.jpg Time to trim more of the Classic Dash Surround http://garagescene.net/_data/i/uploa...a498f5a-me.jpg Funny story. I was at the Doctor a couple of weeks ago and the Dermatologist used this little marker on leg. Since I love Green & Blue I asked her if I could have the marker since they have to throw it out after they use it. She said yes and thankfully I had it as I tried ever marker I had to mark the hole that I need to drill and nothing worked. I decided to look in my truck and I found it and it worked perfectly. http://garagescene.net/_data/i/uploa...fd6647b-me.jpg http://garagescene.net/_data/i/uploa...37b378e-me.jpg I mounted the bracket to the dash bracket with a nut and bolt (sorry no picture) however before i installed I screwed the sheet metal screw into so it would be easier to install the surround. http://garagescene.net/_data/i/uploa...9648a45-me.jpg Surround is in !!! http://garagescene.net/_data/i/uploa...c9aa9e2-me.jpg Now for the rest of the stuff. http://garagescene.net/_data/i/uploa...6de9a81-me.jpg First Up is the headlight switch and if you guys have any ideas as what I can use to fill the hole below the switch I would love suggestions. http://garagescene.net/_data/i/uploa...ed38bdb-me.jpg Autometer Clock http://garagescene.net/_data/i/uploa...b21f3a6-me.jpg I know it looks crooked it's just an illusion http://garagescene.net/_data/i/uploa...3be13d8-me.jpg Da !!!! Next make sure you install the retaining bracket before you plug everything in. http://garagescene.net/_data/i/uploa...2a75d98-me.jpg http://garagescene.net/_data/i/uploa...a787f25-me.jpg http://garagescene.net/_data/i/uploa...3cc3425-me.jpg Holley Dash wiring http://garagescene.net/_data/i/uploa...7736357-me.jpg GPS Signal wire http://garagescene.net/_data/i/uploa...e7e507f-me.jpg http://garagescene.net/_data/i/uploa...610f5d0-me.jpg http://garagescene.net/_data/i/uploa...dbef7b5-me.jpg http://garagescene.net/_data/i/uploa...631ccef-me.jpg http://garagescene.net/_data/i/uploa...7b3cbe7-me.jpg http://garagescene.net/_data/i/uploa...30cea3c-me.jpg http://garagescene.net/_data/i/uploa...bc624a6-me.jpg http://garagescene.net/_data/i/uploa...a55fa6e-me.jpg Heading out to Dinner with my wife and daughter. http://garagescene.net/_data/i/uploa...d2cac59-me.jpg |
Holley GPS Wire (( 04-07-23 ))
While I was cleaning up I notice the GPS Signal wire as not in such a great place. My plan is to wrap the
wire in TechFlex abrasion wrap to protect it. http://garagescene.net/_data/i/uploa...1aa0872-me.jpg http://garagescene.net/_data/i/uploa...31a9895-me.jpg |
Firing Up The Holley Digital Dash (( 04-09-23 ))
I finally got back out in the garage and I am looking forward starting the car and seeing if I wired the dash correctly.
http://garagescene.net/_data/i/uploa...ed404b3-me.jpg Yahooooooo http://garagescene.net/_data/i/uploa...4f55e45-me.jpg |
MJ-Really like the yellow striping on your R…
https://i.postimg.cc/sfBg0pNj/789844...4-E44-D2-A.jpg As far as what goes in the hole in your dash, how about making this emoji functional…:G-Dub: Just press it every time you think of something else the ‘70 needs…and it automatically sends $500 to Holley, ARP etc. :P |
Thank you and now I need the black mirrors & gills
mj Quote:
|
Quote:
|
Man I'm so happy to see the blue tape exiting the scene!!
Great job Marty! After you get the dash together, might want to calibrate the vintage air controls to make sure you're getting full sweep of all the stepper motors in the base. If you have a gen IV setup, follow this procedure, had to use it recently on a car I was working on. Doesn't matter if you have the knob setup or factory style, calibration is calibration.:thumbsup: https://www.vintageair.com/tech-topi...control-panel/ |
Yeah, need to see more on the P-car!
https://www.lateral-g.net/forums/cac...500b57b-me.jpg The heck with the Camaro! LOL, just kidding! You are doing super job and I've never seen such documentation. |
Cayman Project
I will be honest the 35k I spent on the Cayman has to be the best money I have ever spent. However, it did slow the progress of the Camaro and thank you for the kind words.
Quote:
I picked up the car in 2016 and in may of 2018 I had the guys at Next Level Detail correct the paint and wow they did a fantastic job on the car. http://garagescene.net/_data/i/uploa...a2656c8-me.jpg I had the roof & hood wrapped as I haul my bikes on the roof and sometimes they drop mud on the roof. http://garagescene.net/_data/i/uploa...7b739c3-me.jpg Had the Wheels powder coated black http://garagescene.net/_data/i/uploa...33c33c0-me.jpg http://garagescene.net/_data/i/uploa...99e1c49-me.jpg Built a crazy tire rack for the front tires http://garagescene.net/_data/i/uploa...7442b57-me.jpg http://garagescene.net/_data/i/uploa...53c3d73-me.jpg Took the car to Road America and had a blast http://garagescene.net/_data/i/uploa...18fbb96-me.jpg http://garagescene.net/_data/i/uploa...6934766-me.jpg http://garagescene.net/_data/i/uploa...45548d6-me.jpg http://garagescene.net/_data/i/uploa...cf193da-me.jpg Built a wheel mount for the roof rack http://garagescene.net/_data/i/uploa...c9ce994-me.jpg http://garagescene.net/_data/i/uploa...dd3d10f-me.jpg http://garagescene.net/_data/i/uploa...994ec56-me.jpg http://garagescene.net/_data/i/uploa...6ca87ba-me.jpg One of my tires is just a little to big http://garagescene.net/_data/i/uploa...f7ee320-me.jpg http://garagescene.net/_data/i/uploa...eb103a0-me.jpg Wrapped the rear wing and http://garagescene.net/_data/i/uploa...2b6cb67-me.jpg Made some cool center cap Logo's http://garagescene.net/_data/i/uploa...b93fed3-me.jpg http://garagescene.net/_data/i/uploa...7bf252e-me.jpg Got my first flat http://garagescene.net/_data/i/uploa...7976742-me.jpg Took it my neighbor for a car wash http://garagescene.net/_data/i/uploa...bbf5a1c-me.jpg Finally put in a phone mount http://garagescene.net/_data/i/uploa...013ba0c-me.jpg Replaced the headliner http://garagescene.net/_data/i/uploa...502c55d-me.jpg http://garagescene.net/_data/i/uploa...125a3e0-me.jpg Washed the car before taking it to Xtreme Graphics http://garagescene.net/_data/i/uploa...3976253-me.jpg http://garagescene.net/_data/i/uploa...1da8dac-me.jpg I still have to change the silver gills and mirrors to black http://garagescene.net/_data/i/uploa...5d528c0-me.jpg http://garagescene.net/_data/i/uploa...b7fc347-me.jpg Remy picture for Skip http://garagescene.net/_data/i/uploa...c3cd491-me.jpg Working on this next http://garagescene.net/_data/i/uploa...92eed5e-me.png yep, I drive the car !! http://garagescene.net/_data/i/uploa...aaabb11-me.jpg http://garagescene.net/_data/i/uploa...e57bf1e-me.jpg |
| All times are GMT -7. The time now is 01:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net