Lateral-g Forums - Butt Splicing

Page 6 of 6

« First

Show 40 post(s) from this thread on one page

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)

- Interior and Electrical (https://www.lateral-g.net/forums/forumdisplay.php?f=40)

- - Butt Splicing (https://www.lateral-g.net/forums/showthread.php?t=40517)

JohnUlaszek

03-19-2013 08:23 AM

Quote:

Originally Posted by GriffithMetal (Post 469991)

Here is some good crimp info from Molex.
http://www.molex.com/pdm_docs/ats/TM-640160065.pdf

I prefer the non insulated crimp covered with heat shrink. It makes for compact, quality splices.

That's a great resource. Going to add that link to the blog post. thanks!

grif54

03-19-2013 05:06 PM

I was just wondering if anyone could suggest a good quality crimper? I was looking at some at Grainger a couple of weeks ago but didn't get one yet. Thanks

GriffithMetal

03-24-2013 06:40 PM

Quote:

Originally Posted by grif54 (Post 471176)

I was just wondering if anyone could suggest a good quality crimper? I was looking at some at Grainger a couple of weeks ago but didn't get one yet. Thanks

If you want something that is inexpensive and will work for both non-insulated and insulated wires I'd recommend the Klein 1005 crimp tool.

Waytek sells some nice crimping tools as well as McMaster. Parts express has a good selection too. I don't give my business to Grainger.

All times are GMT -7. The time now is 06:01 PM.

Page 6 of 6

« First

Show 40 post(s) from this thread on one page