Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   "The Little Girl" 68 Camaro (https://www.lateral-g.net/forums/showthread.php?t=51219)

trevor572 12-11-2015 12:20 AM

Hi Tony
 
Quote:

Originally Posted by awr68 (Post 624243)
Looking great! Keep at it! try to deal with all the little tasks while you wait on the bigger parts to arrive. It will really help in the end of the build!

Yes Mate, it certainly will. As much as I'm impatient to get the bigger jobs out of the way, I'm thinking about putting a bit of the bling on the little girl. I think that's not only going to be at least a little productive, but should make for an enjoyable weekend also. Thank's for the encouragement too Tony. Appreciate it mate. Cheers Trevor.

awr68 12-11-2015 06:02 PM

As long as the paint work is finished, cured and you aren't going to do any polishing of the paint I say go for it! Start putting a few things on it! It will change the look and get you all kinds of excited to finish it! Enjoy!

Spiffav8 02-10-2016 09:16 AM

:gitrdun: What's the latest?

trevor572 02-11-2016 12:04 AM

Hi Curtis.
 
Hi Curtis, I can't help but wonder if this isn't pay back for giving you a hard time on occasion. lol. Well Mate. I make a little time most evenings and I'm making steady progress on things like modifying the transmission tunnel and fabricating a crossmember for the magnum etc. I had a couple of hold ups waiting for parts to arrive down here. I will get some pictures organised in the next week or so and bring you up to speed.
Cheers Trevor.

https://photos.smugmug.com/photos/i-...Rg6x782-XL.jpg

https://photos.smugmug.com/photos/i-...-FcKsQKm-L.jpg

Spiffav8 02-11-2016 01:56 AM

Quote:

Originally Posted by trevor572 (Post 629634)
Hi Curtis, I can't help but wonder if this isn't pay back for giving you a hard time on occasion. lol. Well Mate. I make a little time most evenings and I'm making steady progress on things like modifying the transmission tunnel and fabricating a crossmember for the magnum etc. I had a couple of hold ups waiting for parts to arrive down here. I will get some pictures organised in the next week or so and bring you up to speed.
Cheers Trevor.

Modifying the transmission tunnel and fabricating a crossmember requires pictures. Pretty sure that's an International Law. :rules:

No pay back. Just a little push to make sure you're still making progress.

:cheers:

Spiffav8 02-17-2016 08:23 AM

An assist for Trevor.

Nice work on the cross member buddy.

https://photos.smugmug.com/photos/i-...-S5C5K7d-L.jpg

https://photos.smugmug.com/photos/i-...-98hmxSG-L.jpg

https://photos.smugmug.com/photos/i-...-kjxsVxB-L.jpg

trevor572 02-17-2016 11:17 AM

Hi Curtis.
 
Thanks for posting the pictures Curtis. 😊 Yeah just finished the crossmember today, I should try to get some better photo's later on, it sweeps back and down, I ended up with a 2 degree down angle on the engine/trans which from what I've read in the forum here is pretty good. Best of all it cost nothing to make, fits nice and I'm done rolling around on the floor under the car, well for a day or two anyway.😀 Cheers Trevor


All times are GMT -7. The time now is 01:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net