Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   DREAMIN TA 2 (https://www.lateral-g.net/forums/showthread.php?t=60111)

Panteracer 11-01-2025 08:08 PM

DREAMIN TA'S
 
My engine dynoed 440 at the wheels of the car
of the previous owner... not too crazy of a cam but
round ports, hydraulic roller, shafts, single plane
Not enough for him so at maybe 500 miles he decided
to sell it and get a big block chevy...
Perfect for my auto trans, 10 bolt car cruiser.... I have
enough high hp cars so this will be fine for me without
breaking things


Bob

camcojb 11-02-2025 08:02 AM

Quote:

Originally Posted by Panteracer (Post 735373)
My engine dynoed 440 at the wheels of the car
of the previous owner... not too crazy of a cam but
round ports, hydraulic roller, shafts, single plane
Not enough for him so at maybe 500 miles he decided
to sell it and get a big block chevy...
Perfect for my auto trans, 10 bolt car cruiser.... I have
enough high hp cars so this will be fine for me without
breaking things


Bob

I drove Camaro X on Power Tour with basically a stock LS7 and headers/tune. So about the same power level as you have. It was a ball, plenty of power. Surprised me as I tend to like a LOT of power lol. That's a great street engine you have Bob.

Panteracer 11-02-2025 08:03 PM

DREAMIN TA'S
 
Going to put cats on a pypes exhaust system and
maybe my wife will ride in one of my cars.. I bought
her a 78 Ta after we first got married... she may even
drive it... funny as she dated a few guys with stick shift
Vettes but won't even go in my 69 sidepipe headered vette

Go figure

Bob

OLDFLM 11-03-2025 04:47 AM

Hedman 28150
 
I have Hedman 28150 ceramic headers on my car... had them on there for 15 years now and have never had any issues with them hitting speed bumps or anything like that FWIW.

Panteracer 11-04-2025 09:33 AM

DREAMIN TA 2
 
Ty,
My engine has round port edlebrocks....the center
ports are separate from each other and spaced farther
apart... Factory Round port manifolds coming any day now

Bo

WSSix 11-08-2025 08:33 AM

Quote:

Originally Posted by camcojb (Post 735375)
I drove Camaro X on Power Tour with basically a stock LS7 and headers/tune. So about the same power level as you have. It was a ball, plenty of power. Surprised me as I tend to like a LOT of power lol. That's a great street engine you have Bob.

I have had more fun with 3-400 whp cars than I have with anything more. Obviously, everyone is different in their desires or skill levels. For me, I'd rather have a good, manageable power curve and car than something wild.

Sounds like a great engine, Bob. Should work very well for you.

Panteracer 11-20-2025 10:03 AM

DREAMIN TA 2
 
1 Attachment(s)
Finally finished the front Alt and Ps brackets and
mocked up the Pypes 2 1/2" exhaust system that
fit nicely to the Ram Air Manifolds

Wiring and fuel system next

Bob

Panteracer 01-27-2026 10:16 AM

DREAMIN TA 2
 
1 Attachment(s)
Been slowly plugging away on my
brackets, hoses etc
Wiring, fuel system and exhaust are what is left
Gonna do a little Autocrossing with the Pantera
in a few weeks so prepping it now

Bob

camcojb 01-27-2026 01:14 PM

Looks great Bob! :thumbsup:

WSSix 01-28-2026 06:29 PM

Looks all business. I like it. Keep up the great work.


All times are GMT -7. The time now is 11:47 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2026, vBulletin Solutions Inc.
Copyright Lateral-g.net