Thanks Eric! haha your chevy's not bad either! :unibrow: :thumbsup:

New Driveshaft from Coleman racing

http://i1017.photobucket.com/albums/...8/cd394e5c.jpg

http://i1017.photobucket.com/albums/...8/0d2d1f10.jpg

Finished up the floor and just have to finish welding it

http://i1017.photobucket.com/albums/...8/688d7d55.jpg

http://i1017.photobucket.com/albums/...8/53d1d117.jpg

http://i1017.photobucket.com/albums/...8/d6935402.jpg

http://i1017.photobucket.com/albums/...8/e4eaa8d8.jpg

Working on adjusting the front end yet. Going to be putting the doors on this weekend

http://i1017.photobucket.com/albums/...8/b06d2f8a.jpg

Forgot to add we also ordered the wilwood reverse mount pedal assembly with the forged arms along with the M/C's. They are on backorder till febuary. not a real big deal as we have enough stuff to keep us busy in the mean time.

Happy New Year Everyone! :thumbsup:

It looks good, your making some nice progress buttoning it all up.

Looks good Tyler , has the Turn Key stuff come in yet?

Thanks Wayne! Its alot farther along then we ever thought at this point!

Thanks Josh! Turn key power steering will be coming in early this week sometime. :thumbsup:

Got the doors hung today. still have to adjust the bottom of the front fenders yet

http://i1017.photobucket.com/albums/...mo8/004-20.jpg

http://i1017.photobucket.com/albums/...mo8/002-20.jpg

http://i1017.photobucket.com/albums/...mo8/006-13.jpg

http://i1017.photobucket.com/albums/...mo8/008-11.jpg

http://i1017.photobucket.com/albums/...mo8/010-12.jpg

The power steering system will be ariving this week sometime and after we get that installed we will be able to get a mock up radiator in and start making the front radiator saddle :woot:

Steering column is in

http://i1017.photobucket.com/albums/...mo8/001-13.jpg

Picked up the 2 bumpers off our 3rd car that is in storage so we have some good parts for the final bumpers

http://i1017.photobucket.com/albums/...mo8/002-21.jpg

Picked up a set of T-Bird Seats but missing a few parts of the track

http://i1017.photobucket.com/albums/...mo8/003-15.jpg

Power Steering showed up today also but have not gotten it out of the box yet Hoping to install that later this week. Looks just like this

http://i1017.photobucket.com/albums/...mo8/1030-1.jpg

looks great love it and the color.

Great progress Tyler. Love the stance.

That car is looking great. Very nice. Keep up the great work.

Thanks! It will look even better when its repainted!

Thanks! the front springs are starting to settle a little and its looking good!

Thanks! We got one seat in and had to make some bushings and stuff since the guy we bought them from didnt tell us there were some parts missing from them.

Hoping to have the powersteering in this weekend along with the passenger seat :thumbsup:

Got the Power steering system together and on the motor

I would like to thank everyone at Turn Key Engine Factory for putting together such a nice product! We have never seen something bolt together as nicely as this pulley system has!

http://i1017.photobucket.com/albums/...8/5c497fc2.jpg

http://i1017.photobucket.com/albums/...8/c3fa5381.jpg

http://i1017.photobucket.com/albums/...8/f0166208.jpg

http://i1017.photobucket.com/albums/...8/71859781.jpg

Got the T-Bird Seat mounts made and bolted in the car

http://i1017.photobucket.com/albums/...8/2ba006f6.jpg

http://i1017.photobucket.com/albums/...8/d8968321.jpg

Your stylin now! The belt system looks great in there.

Lookin good Tyler. Now stop worryin bout that snowmobile and keep building!;)

:thumbsup: Thanks guys! I wish I could be riding that snowmobile more :D

Steering is all finished up! We replaced the column that we had in there for a IDIDIT which is much nicer than the one we originally had in there. Got all of the linkage all finished up and it turned out great!

http://i1017.photobucket.com/albums/...8/7bd1446f.jpg

http://i1017.photobucket.com/albums/...8/f412f2c8.jpg

http://i1017.photobucket.com/albums/...8/96c140f8.jpg

Finally got the prothane mount that was on back order for a month and a half. The mount came with a crossmember to bolt up to a 96-98 mustang gt but we threw that on the side and made our own. The Ford rubber mount just wasn't cutting it. Only way to get the pollyurathane mount was to buy the kit and we are sure glad we did!


http://i1017.photobucket.com/albums/...8/a5181e90.jpg

http://i1017.photobucket.com/albums/...8/24a7b272.jpg

http://i1017.photobucket.com/albums/...8/1682766e.jpg

Wilwood pedals came in on Friday also from back order for a month. They ended up sending 3 3/4" bore m/c's when we needed 2 and a 7/8". So we will have to send one back and exchange it. We started mocking up the pedal assemblys and right off the bat we have a pretty good idea on where to mount it and good pedal location. We will run remote fill with the 3 resivoirs under the dash speaker hole which will work out real cool!

http://i1017.photobucket.com/albums/...8/42f9cc50.jpg

http://i1017.photobucket.com/albums/...8/81d3ea04.jpg

http://i1017.photobucket.com/albums/...8/3be2915f.jpg

Behind gauges

http://i1017.photobucket.com/albums/...8/1b8e056f.jpg


This week we will finish mounting the pedal assembly and should have a finalized radiator so we can finish up the front core support. Once that is done we will order our mufflers from stainless works and start the exhaust system and also measure up a fuel tank and send the dimensions to ricks and have them make us one of their awesome tanks!

Gotta love the Wilwood pedal set-up.

I love the setup! Looks killer and is one of the best pedal assemblies out there imo. :thumbsup:

It coming along very well. Good to see a Ford motor is going to get installed and by the way nice choice.

Wilwood pedals are in Turned out great! We will be using the remote fill resivoirs and mounting them under the dash speaker hole with a false screen so it will look like a speaker but really only be an easy acess for under the dash

http://i1017.photobucket.com/albums/...nowmo8/041.jpg

http://i1017.photobucket.com/albums/...nowmo8/042.jpg

http://i1017.photobucket.com/albums/...nowmo8/043.jpg

We had to notch the frame on the passenger side just slightly so we could fit the header

going to finish welding that up tomorrow

http://i1017.photobucket.com/albums/...wmo8/044-1.jpg

For some reason this coment didnt show till now!

Gotta love a FORD in a FORD! I am really excited for this coyote motor! :thumbsup:

Gas pedal is in! No cable to run or nothing just plug and play

http://i1017.photobucket.com/albums/...wmo8/033-2.jpg

http://i1017.photobucket.com/albums/...wmo8/035-1.jpg

Radiator should be done next week sometime :thumbsup:

Progress its a great thing. ;)

X2 :thumbsup:

I'll say it again, so cool to see one of these cars get these mods.

Thanks Wayne!

Its going to be different and thats what we like! :D




Does anyone know of a place to buy stainless tubing for exhaust from? either 2.5 or 3 inch

I would try Behlings in Butler.

Looks good Tyler!

Tim

Thanks Tim! We normally go there but just thought if I could get a good deal somewhere else I would too. It gets expensive when you add up all to the special bends and stuff.

Although behlings is right down the road from the house.

Loving this build. Great progress and really turning out nice. Those pedals look pimp>>>>>>

Thanks man! Love your build myself!
I am really happy with the way the pedals turned out. Even the gas pedal matches pretty good.

Got the sway bar on, radiator made, and added another steering column suport this week.

Sorry no pics this time, We are working on getting the radiator backets made right now. its going to work out pretty slick!

I will try to take some pics tomorrow :thumbsup:

Looking forward to seeing the pictures. Great build.

Great to see a 50's ford getting worked over.:thumbsup:

Thanks guys! I will get pics soon ;)

Not much will be done this weekend as I am heading down to the Chicago WOW and My Grandpa has a funeral to attend. Back on her next week :thumbsup:

Here are the pictures that I promised

http://i1017.photobucket.com/albums/...8/478d7ac6.jpg

http://i1017.photobucket.com/albums/...8/85291eaf.jpg

http://i1017.photobucket.com/albums/...8/916cb57e.jpg

http://i1017.photobucket.com/albums/...8/1521bd0e.jpg

http://i1017.photobucket.com/albums/...8/2913a0f9.jpg

It looks good, nice job fitting the radiator. :thumbsup:

Yeah man, looks like it was (shoulda been) born there. Car's lookin' great Bro :thumbsup:

Thanks guys! It's really turnin out great! Just trying to be different than the rest. Looks much cleaner and doesn't stick out like a sore thumb. Got to finish up the mounts to bolt it to the car and ac condensor for the front. Then figure out what electric fan were going to use.

Update!

Radiator is all done and mounted with the fans.

http://i1017.photobucket.com/albums/...8/1985ffdf.jpg

http://i1017.photobucket.com/albums/...8/00d0a000.jpg

http://i1017.photobucket.com/albums/...8/7ea49e42.jpg

http://i1017.photobucket.com/albums/...8/906bfbf0.jpg

http://i1017.photobucket.com/albums/...8/8ede0fa6.jpg

http://i1017.photobucket.com/albums/...8/2cfcc470.jpg

Maradyne Electric fan setup

http://i1017.photobucket.com/albums/...8/655c8f56.jpg

Mounted the computer in the fenderwell and working on hiding the wires yet

http://i1017.photobucket.com/albums/...8/73b2c7fd.jpg

Vintage air mounted

http://i1017.photobucket.com/albums/...8/82f58409.jpg

Still playing with shifters

http://i1017.photobucket.com/albums/...8/0acb6901.jpg

Update!

Radiator is all done and mounted with the fans.

http://i1017.photobucket.com/albums/...8/1985ffdf.jpg

http://i1017.photobucket.com/albums/...8/00d0a000.jpg

http://i1017.photobucket.com/albums/...8/7ea49e42.jpg

http://i1017.photobucket.com/albums/...8/906bfbf0.jpg

http://i1017.photobucket.com/albums/...8/8ede0fa6.jpg

http://i1017.photobucket.com/albums/...8/2cfcc470.jpg

Maradyne Electric fan setup

http://i1017.photobucket.com/albums/...8/655c8f56.jpg

Mounted the computer in the fenderwell and working on hiding the wires yet

http://i1017.photobucket.com/albums/...8/73b2c7fd.jpg

Vintage air mounted

http://i1017.photobucket.com/albums/...8/82f58409.jpg

Thats a nice looking fan set up. Looking good.