Thanks for the props guys! Primo has enjoyed doing all this welding!:D


2 inches narrow from stock Sub.. Should have plenty of turning radius..

Using C6 upright.. UCA & LCA are built to our own design..

Al- Got a 2007 Mustang that will be in the Optima corral & WOrking on getting the 68 Firebird ready also.. going to the paint shop on Monday..

Here are a few more details on the chassis... Since we had it on the table.. We plumbed the brake line that crosses on the front brakes.. Much more easier to do it now....

http://i1015.photobucket.com/albums/...n/IMG_2660.jpg

Here are JCG's interlocking Sub-frame connectors... Might as well get those done too...

http://i1015.photobucket.com/albums/...n/IMG_2657.jpg


http://i1015.photobucket.com/albums/...n/IMG_2661.jpg

We got some assembly going on..

JCG Engine mounts...

http://i1015.photobucket.com/albums/...n/IMG_2672.jpg

Engine sitting between the frame rails...


http://i1015.photobucket.com/albums/...n/IMG_2673.jpg

http://i1015.photobucket.com/albums/...n/IMG_2675.jpg

The 2010 Camaro Accy drive mounted...

http://i1015.photobucket.com/albums/...n/IMG_2674.jpg


We designed around Kook's headers.. buy them off the shelf...

http://i1015.photobucket.com/albums/...n/IMG_2676.jpg

http://i1015.photobucket.com/albums/...n/IMG_2682.jpg

Lookin good Cris :thumbsup:

Cris,

Great pictures!

How many inches between #5/#7 exhaust port and the steering arm? Also, how many inches between #8 exhaust port and the frame?

Awesome Job Chris! :hail: :cheers:

Amazing job Chris:thumbsup: :thumbsup:

:thumbsup:

This pic gives me an idea. Camaro vs Mustang build-off!

http://i1015.photobucket.com/albums/...n/IMG_2675.jpg

I have been waiting patiently & working hard to get to this phase on this 69… Taking on the task of doing my own version of a chassis has been long & pain staking.. But @ this stage it has been worth the effort.. Now we have to work on a sway bar design!

http://i1015.photobucket.com/albums/...n/IMG_2694.jpg

http://i1015.photobucket.com/albums/...n/IMG_2703.jpg

http://i1015.photobucket.com/albums/...n/IMG_2693.jpg


We moved the transmission tunnel up to gain room for the driveshaft, rear suspension, & exhaust…

http://i1015.photobucket.com/albums/...n/IMG_2695.jpg

Finally got to the point where we got wheels on the car to see the what it will be looking like…

http://i1015.photobucket.com/albums/...n/IMG_2701.jpg

http://i1015.photobucket.com/albums/...n/IMG_2699.jpg

Wow!!! lookin Real good.:thumbsup: :thumbsup:

now this is one sick build

Wow that is awesome.. Great job :thumbsup:

Thank you! Got some cool stuff coming on the plumbing for the thirsty Mast Supercharged LS7... Dual 3/8 fuel lines from front to back.. one for each bank of the fuel injectors with dual ZL-1 Camaro fuel moduals.. Carl from Vaporworks has been helping with that...

^This. Looking really good guys.

Again, the car looks killer!

The only way to pick a winner would be based on performance, because both of these cars are going to look killer.

Hey bud I get busy with life and come back to the board and see this. :thumbsup:

Thanks for the goosebumps, simply awesome work. :hail:

I was asked if we had any updates on the 69.. Here are a few… Reproduction sheet metal is always fun to install & make it conform to the way it should fit.. We got all the body lines done…

http://i1015.photobucket.com/albums/...n/IMG_2875.jpg

We also changed the rear of the cowl hood & gave it a better flow to the finish of lines..

http://i1015.photobucket.com/albums/...n/IMG_2873.jpg

We also had to modify the inside of the hood to clear the Whipple Supercharger..

http://i1015.photobucket.com/albums/...n/IMG_2896.jpg

The grill has been fun fitting up to the reproduction sheet metal.. So I thought we would try something different.. On a factory 69 grill a metal stripe is use to stiffen the mount of the grill.. but wanted a nicer finish & since lately we have been playing with bonding metal to plastic.. We built a metal strip with studs & bonded it to the grill & while we were @ figured we would make a custom front bumper that would make the grill & front one pcs..

http://i1015.photobucket.com/albums/...n/IMG_2898.jpg

http://i1015.photobucket.com/albums/...n/IMG_3046.jpg

http://i1015.photobucket.com/albums/...n/IMG_3047.jpg

Exterior body modification are done.. Currently in the body shop doing some body work!

Great job on that grill/bumper. Love the look and the fit :thumbsup: :thumbsup:

x2 on bumper/grill

that bu,per grill mod is slick. :thumbsup:

Cris,

This car is going to be bad ass!

Brian

Nice nose job possibly one of the cleanest yet! (no puns intended) :thumbsup:

nice touch, look ma, no bumper... well kinda.

Standard body bonding material?

Cris you guys have that metal plastic bonding technique down! That looks beatiful :hail:

Just make that out of billet and sell 'em.

Wow! Love the integrated grill & front bumper.

G.

Thanks for the props guys! I sent over pics to the owner yesterday & was very pleased with the front clip work...

Greg- No billet but maybe get a mold done for Carbon fiber grill with center grill machined out of billet.. MAYBE! :D Thanks making me think early in the morning...

Vince- We use 3M panel adhesive that they use for bonding panels on late model cars... The whole corners on the grill we shaped with this stuff..

I agree, Nice eye on the design of the front. Smooth and simple.

Just when you think everything has been done to a 69 someone comes up with a new idea.

I think it's awesome that you guys keep pushing the design idea's.

You guys are truly Trend Setters.

Best looking 69 so far. From back to front man---that looks amazing.

Looks Great!

Damn you beat me to it. That looks exactly like my rendering

https://fbcdn-sphotos-h-a.akamaihd.n...23437127_n.jpg

Great minds think alike

Great job on every single mod on this camaro, the build is slick:thumbsup: :thumbsup:

:faint:

Actually your valance looks better.. this one like others i have seen looks like an open Mouth of a fish.... IMHO.. your squared off looks much better...
FWIW my 2 cents on the version here... take pic and then in Photo chop match the valance opening radius with the outside fender radius (curve)

Not trying to be a fool... this work as all the work on this site is really awesome craftsmanship..

Well.. We got one more body modification to do! :D

http://i1015.photobucket.com/albums/...psb08eceed.jpg

Wow the front end looks sweet! Nice work.

Cris any updates on this guy?