Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Project Updates (https://www.lateral-g.net/forums/forumdisplay.php?f=16)
-   -   Project FNQUIK (https://www.lateral-g.net/forums/showthread.php?t=17217)

waynieZ 09-30-2012 10:23 PM

I have an Aeromotive referance regulator and a Weldon pump controller .
I have a question. I have an MSD 6A , will the new Digital 6A give me any advantage?

GregWeld 10-01-2012 08:26 AM

Quote:

Originally Posted by waynieZ (Post 438945)
I have an Aeromotive referance regulator and a Weldon pump controller .
I have a question. I have an MSD 6A , will the new Digital 6A give me any advantage?



Quick answer -- not that I can think of.


BUT -- there's always a big butt somewhere right? The MSD can wreck havoc on your EFI if done incorrectly!

Make certain that there are no shared wire runs -- and that the MSD and ECU are AT LEAST 2 feet apart.

MSD boxes are very powerful and if you want all manor of problems and weird issues just fail to heed the warnings.

waynieZ 10-01-2012 11:51 AM

Noted

tones2SS 10-01-2012 06:19 PM

Good to hear Wayne. Keep up the good fight brother! Gotta get better so you can finish that beast in the garage.:thumbsup:

MX145 06-17-2013 01:20 AM

Hi Wayne. Ive been going through your thread and I'm in awe. I don't know how you could be more thorough than this. Your car is unbelievable! Hope you're feeling better.

windycitychev 06-17-2013 09:14 AM

BAD AZZ build kee your spirits up and I was once in that same position and know the horrible feeling. But being able to pick yourself up and keep going with your dream build is key and keep that same spirit up and dont look back. Keep the pics coming brother god bless

waynieZ 06-17-2013 12:37 PM

Thanks MX145, windycitychev

Went over to my buddy's house , the engine got washed down and painted Chevy Orange with Eastwood's ceramic engine paint with hardener. It looks like its still wet. Smooth finish, its supposed to be more chemical resistant with the hardener. The base pan is a Milodon power pan for the stroker. When my friend washed the motor the coating on the pan came off with the rinse so its all orange now.
Tomorrow I'm going up there with the intake if I remember I'll take a couple of pictures maybe it will motivate me to suck it up and get moving.

tubbed69 06-17-2013 01:12 PM

Waynie I hope you get feeling better and get back to work on that nice car of yours.:thumbsup: :thumbsup:

MX145 06-17-2013 01:22 PM

Quote:

Originally Posted by waynieZ (Post 487152)
Thanks MX145, windycitychev

Went over to my buddy's house , the engine got washed down and painted Chevy Orange with Eastwood's ceramic engine paint with hardener. It looks like its still wet. Smooth finish, its supposed to be more chemical resistant with the hardener. The base pan is a Milodon power pan for the stroker. When my friend washed the motor the coating on the pan came off with the rinse so its all orange now.
Tomorrow I'm going up there with the intake if I remember I'll take a couple of pictures maybe it will motivate me to suck it up and get moving.

I'm curious to see how the ceramic paint works out for you. I would like to do something similar on my engine.

67ragtp 06-17-2013 01:44 PM

Hey Wayne, been waiting for an update on your build, glad to hear your working on the car. Get some pics of that power plant, especially with that big intake and throttle body up there.
Hope your feeling good- Rich


All times are GMT -7. The time now is 06:34 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net