Lateral-g Forums

Lateral-g Forums (https://www.lateral-g.net/forums/index.php)
-   Race Cars and Modern Pro-Street (https://www.lateral-g.net/forums/forumdisplay.php?f=57)
-   -   Budget '69 Camaro Track Car - NO WHINERS! (https://www.lateral-g.net/forums/showthread.php?t=34130)

Vince@Meanstreets 06-05-2013 10:16 PM

Quote:

Originally Posted by Sieg (Post 484540)
One problem.........never driven a car there! All my track experience is on bikes, I can't wait to see how 4 wheels changes perceptions. Braking point habits are my main concern :ohsnap: two markers too late!..........catch ya on the next lap, unless it's turn 10.........see ya next year when it's fixed. :D

bull cheezy, its like riding a... bike..ahh never mind

Vince@Meanstreets 06-05-2013 10:19 PM

2 Attachment(s)
i'll get something up soon, had a parts delay on another project so it put me off a bit.

hey, we got his airbox to fit with the addition of the 2" spacer. Someone should help me find a lip seal that will work. edit....similar to this..

Track Junky 06-06-2013 06:53 AM

Quote:

Originally Posted by Sieg (Post 484644)
My issue with 14/15 on bikes is the seam in the surface (read curb) it was right at what I felt was the ideal apex and I could never find a shallow line that would generate drive out of 15, the deep line over the seam upset the chassis enough that you were wide on exit or feathering throttle trying to keep from going wide. :bang:

Entering 1 on the bike was keep it pinned past the tower and turn in to into the pit lane once past the pit lane wall stab the brakes and turn it in and get on the throttle.

If I'm not mistaken the key to a stable chassis going into 8 starts will nailing 6's apex/exit so you can pin 7 and pray through 8......:D

With the bike a slight lift to trailing throttle going into 8 was enough to maintain confidence. (does that bank look scarier in car than a bike, not sure which would be worse?) That corner is a rush when you get it close to right............so are 9 a & b pinning to toward the horizon, 10, 11, 12, 13, 14, 15, etc........what a great track!!

Don't worry G, you'll do fine, get used to the new stuff in the am then focus on having a good time maximizing your lines on the track..........not the infield. :D

Thanks Sieg. Your memory serves you well. I can see how the surface on the outside in between 14 and 15 would make it difficult for a bike.

You also nailed 6,7, & 8. 6 isn't bad, its the transition from 7 and getting through 8 that has me puckering and pray is putting it lightly.

Sounds like we take turn 1 exactly the same only I want to try and lay off of the brake a bit more than I have been.

I honestly feel I'm losing a good 1 second through 1 and a good 1 second through 8. Nailing those two turns should help me achieve my goals. If Vince and I have set up that rear sway bar correctly and I nail my alignment I'm hoping to surpass my initial target lap times goals.

Sieg 06-06-2013 07:35 AM

One the bike I was only hitting about 135-138 on the front straight (thanks to 14/15), if memory does serve me well the end of the pit wall was the off the throttle marker, I tried to brake and downshift early to get the suspension settled and back on the throttle at turn in and somewhat aggressive on the throttle through the apex. I think the apex speed was "around" 85-95 mph hitting about 110-115 mph before T2

So my braking and throttle applications were slightly earlier than other turns.

T8 was a downshift and trailing throttle setting up for the apex with no brake since the V-twins I was riding have a reasonable amount of engine braking.

Don't know if that helps or is applicable for a car?

I know one thing for sure............I'd love to have four tires on the ground through T3! No trust of that corner whatsoever on a bike, especially with the deteriorating surface on the inside racing line. <Insert chicken sounds here>

chr2002ca 06-06-2013 08:13 AM

That air box is looking good.

intocarss 06-06-2013 03:29 PM

Quote:

Originally Posted by Vince@MSperfab (Post 484665)
i'll get something up soon, had a parts delay on another project so it put me off a bit.

hey, we got his airbox to fit with the addition of the 2" spacer. Someone should help me find a lip seal that will work. edit....similar to this..

I like that air box! INMOHO I don't like the MSD boxes up on the firewall, To much heat and heat is what kills them

Rick D 06-06-2013 04:55 PM

Almost there Gae!! When are we going to see that start up video??

Flash68 06-06-2013 04:58 PM

Quote:

Originally Posted by Rick D (Post 484764)
When are we going to see that start up video??

We're not. :poke:

Sieg 06-06-2013 04:58 PM

Quote:

Originally Posted by intocarss (Post 484749)
I like that air box!

I found that interesting as well, how did that piece come into existence?

intocarss 06-06-2013 05:29 PM

Quote:

Originally Posted by Sieg (Post 484767)
I found that interesting as well, how did that piece come into existence?

Didn't Vinnie make it??


All times are GMT -7. The time now is 12:36 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Lateral-g.net