Next time you are out there you should start taking the tape off the wheels..that might take a while! What's it been two years? :_paranoid

cars looking great Bob/BAD!!

Thanks Anthony. Of all the things Bob would change, the use of "Home Depot" blue tape would probably be number 1. :)

here is a picture of the way the car is sitting now.

Plenty of ride height to drive down gravel roads

http://www.automotivedesigneng.com/g...08_stance1.JPG

I read that you dropped the supercharger off for mock up. Where do they/you want it mounted?

In my car the supercharger is mounted already. I let them use it for mock up on Neds cuda.

Do you have any new pics? What radiator did you go with?

Any thank you for that :)

Good news is it looks like it will all fit if I do decide to go with the Procharger...thats still up in the air right now, but now I know its still possible.

Here is an update,
Since there has been so much talk about Billet door handles, I thought I'd give a sneak peak at what Tim did for my new door handles.
This is just a teaser, I will not show the final door handle till its done.

Tim made a die, to stamp the metal, to give it the correct shape and to have both sides match exactly.

http://www.automotivedesigneng.com/g...camaro/039.JPG
http://www.automotivedesigneng.com/g...camaro/003.JPG

Tig welded to the door and then cleaned up.

http://www.automotivedesigneng.com/g...camaro/004.JPG
http://www.automotivedesigneng.com/g...camaro/008.JPG

Who is this "Tim" guy anyway?....... It sounds like he knows what he's doing!!!


--Eric

Bob, thought you were going soft for a minute there... :unibrow: